Geiger M, Hänsel M, Rebhan T (1992)
Publication Type: Journal article
Publication year: 1992
Publisher: None
Book Volume: 206
Pages Range: 143-150
Journal Issue: 2
DOI: 10.1243/PIME_PROC_1992_206_066_02
It is the intention of the present article to point out a new method for computer aided tool optimization as part of computer integrated tool manufacturing. Based on the results of finite element (FE) analysis and subsequent tool failure simulation, it is possible to optimize the FE model of a tool already at the stage of construction, in order to enhance the service life and process reliability. The permissible degree of freedom for any shape correction, of course, is mainly limited by constructive constraints of the tool and the properties of the material flow during the extrusion process. Thus the resulting optimized geometry has to he considered as a possible constructive alternative. However, analytical as well as practical solutions already show that a parabolical or elliptical curved surface contour, replacing a regular radius, not only improves the fatigue resistance but may have a positive influence on material flow behaviour, friction forces and resulting tool loads as well (1). The influence imposed on the material flow by the geometrical modification of the die shape will be clarified in future by the results of FE process simulation. A renewed simulation run, employing the optimized shape, may be conducted immediately after the optimization process. Along with current material research, the simulation of tool failure based on the finite element method (FEM) analysis of forging techniques (FE process simulation) therefore represents a promising direction for future developments (2-4). © 1992, Institution of Mechanical Engineers. All rights reserved.
APA:
Geiger, M., Hänsel, M., & Rebhan, T. (1992). Improving the Fatigue Resistance of Cold Forging Tools by FE-Simulation and Computer Aided Die Shape Optimization. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 206(2), 143-150. https://doi.org/10.1243/PIME_PROC_1992_206_066_02
MLA:
Geiger, Manfred, M Hänsel, and T Rebhan. "Improving the Fatigue Resistance of Cold Forging Tools by FE-Simulation and Computer Aided Die Shape Optimization." Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture 206.2 (1992): 143-150.
BibTeX: Download