Identifying key processing parameters for the electrospinning of aligned polymer nanofibers

Dörgens A, Roether J, Dippold D, Boccaccini AR, Schubert DW (2015)


Publication Status: Published

Publication Type: Journal article, Review article

Publication year: 2015

Journal

Publisher: Elsevier

Book Volume: 140

Pages Range: 99-102

DOI: 10.1016/j.matlet.2014.10.150

Abstract

Aligned polycaprolactone (PCL) fibers of interest for numerous applications requiring contact guidance and textured topography were fabricated by electrospinning onto a rotating collector using tangential velocities ranging from 0 m/s to 11 m/s. The deposition characteristics of the fibers were investigated by microscopic methods to gather information about fiber diameter, collection angle theta, and number of fibers per reference length. It was shown that the deposition angle ranged from -2.0 degrees to 1.6 degrees and the diameter of the developed fibers averaged 587 nm to 878 nm. Furthermore the deposition angle was found to be independent of die rotation velocity. Homogeneity of the fiber mats was improved with increasing rotation velocity. The number of fibers per reference length, a measure for collection.efficiency, proved to be dependent on the rotation velocity, following a modified Weibull function. Hence the collection efficiency of the process can be improved by increasing the rotation velocity above a critical value. (C) 2014 Elsevier B.V. All rights reserved.

Authors with CRIS profile

How to cite

APA:

Dörgens, A., Roether, J., Dippold, D., Boccaccini, A.R., & Schubert, D.W. (2015). Identifying key processing parameters for the electrospinning of aligned polymer nanofibers. Materials Letters, 140, 99-102. https://doi.org/10.1016/j.matlet.2014.10.150

MLA:

Dörgens, Anna, et al. "Identifying key processing parameters for the electrospinning of aligned polymer nanofibers." Materials Letters 140 (2015): 99-102.

BibTeX: Download