Lehrstuhl für Werkstoffwissenschaften (Allgemeine Werkstoffeigenschaften)


Description:


The research topics of the Institute for General Materials Properties are related with the mechanical properties of structural materials in a broad sense. Testing of the mechanical properties from the nanoscale to macroscopic properties is performed on all aspects including high temperature properties, fatigue, creep, friction and wear. Our research direction is focused on understanding the properties from a micro and nanostructural basis. Therefore microsopic techniques from electron microscopy and scanning probe microscopy to optical techniques are applied to evaluate the microstructural constitution of materials on all length scales.

Address:
Martensstraße 5/7
91058 Erlangen



Subordinate Organisational Units

Juniorprofessor für Werkstoffwissenschaften (3D-Nanoanalytik und Atomsondenmikroskopie)
Juniorprofessur für Werkstoffmikromechanik
Professur für Werkstoffwissenschaften (Simulation und Werkstoffeigenschaften)


Related Project(s)

Go to first page Go to previous page 1 of 3 Go to next page Go to last page

SPP 2074 Grundlagen für die verbesserte Gebrauchsdauerberechnung feststoffgeschmierter Wälzlager durch Multiskalen-Untersuchungen
Prof. Dr. Bernd Meyer; Dr.-Ing. Benoit Merle; Dr.-Ing. Stephan Tremmel
(01/10/2018 - 30/09/2021)


(In-situ-Mikroskopie mit Elektronen, Röntgenstrahlen und Rastersonden):
GRK1896-B3: Mechanische Eigenschaften und Bruchverhalten von dünnen Schichten
Prof. Dr. Mathias Göken; Dr.-Ing. Benoit Merle
(01/04/2018 - 30/09/2022)


ReguLus: Defekt- und Mikrostrukturen, mechanische Eigenschaften und optimierte Wärmebehandlungsstrategien additiv gefertigter Titanlegierungen für großvolumige Luftfahrtstrukturkomponenten (ReguLus)
Prof. Dr. Mathias Göken; PD Dr.-Ing. Heinz Werner Höppel
(01/01/2018 - 31/12/2021)


(SLM-PROP: Verbundvorhaben TARES 2020):
SLM-PROP: Selective laser melting alloys : Process-related material properties & design rules
Dr.-Ing. Steffen Neumeier; Prof. Dr. Mathias Göken; PD Dr.-Ing. Heinz Werner Höppel
(01/02/2017 - 21/01/2023)


(Kolbenbolzen für Leichtbau-Design):
KoBoLD: Kolbenbolzen für Leichtbau-Design
PD Dr.-Ing. Heinz Werner Höppel
(01/01/2017 - 31/12/2019)



Publications (Download BibTeX)

Go to first page Go to previous page 1 of 17 Go to next page Go to last page

Merle, B. (2019). Creep behavior of gold thin films investigated by bulge testing at room and elevated temperature. Journal of Materials Research, 34(1), 69-77. https://dx.doi.org/10.1557/jmr.2018.287
Bresler, J., Neumeier, S., Ziener, M., Pyczak, F., & Göken, M. (2019). The influence of niobium, tantalum and zirconium on the microstructure and creep strength of fully lamellar γ/α2 titanium aluminides. Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing, 744, 46-53. https://dx.doi.org/10.1016/j.msea.2018.11.152
Lenz, M., Eggeler, Y., Müller, J., Zenk, C., Volz, N., Wollgramm, P.,... Spiecker, E. (2018). Tension/Compression asymmetry of a creep deformed single crystal Co-base superalloy. Acta Materialia. https://dx.doi.org/10.1016/j.actamat.2018.12.053
Möller, J., Bitzek, E., Janisch, R., Ul Hassan, H., & Hartmaier, A. (2018). Fracture ab initio: A force-based scaling law for atomistically informed continuum models. Journal of Materials Research, 33(22), 3750-3761. https://dx.doi.org/10.1557/jmr.2018.384
Kümmel, F., Diepold, B., Prakash, A., Höppel, H.W., & Göken, M. (2018). Enhanced monotonic and cyclic mechanical properties of ultrafine-grained laminated metal composites with strong and stiff interlayers. International Journal of Fatigue, 116, 379-387. https://dx.doi.org/10.1016/j.ijfatigue.2018.06.043
Macauley, C., Fernandez, A.N., Van Sluytman, J.S., & Levi, C.G. (2018). Phase equilibria in the ZrO2-YO1.5-TaO2.5 system at 1250 degrees C. Journal of the European Ceramic Society, 38(13), 4523-4532. https://dx.doi.org/10.1016/j.jeurceramsoc.2018.06.010
Khansur, N.H., Eckstein, U., Benker, L., Deisinger, U., Merle, B., & Webber, K. (2018). Room temperature deposition of functional ceramic films on low-cost metal substrate. Ceramics International, 44(14), 16295-16301. https://dx.doi.org/10.1016/j.ceramint.2018.06.027
Kimmel, A.-C., Malkowski, T.F., Griffiths, S., Hertweck, B., Steigerwald, T., Freund, L.,... Schlücker, E. (2018). High-temperature corrosion of Inconel (R) Alloy 718, Haynes (R) 282 (R) Alloy and CoWAlloy1&2 in supercritical ammonia/ammonium chloride solutio. Journal of Crystal Growth, 498, 289-300. https://dx.doi.org/10.1016/j.jcrysgro.2018.06.018
Carton-Cordero, M., Campos, M., Freund, L., Kolb, M., Neumeier, S., Göken, M., & Torralba, J.M. (2018). Microstructure and compression strength of Co-based superalloys hardened by γ′ and carbide precipitation. Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing, 734, 437-444. https://dx.doi.org/10.1016/j.msea.2018.08.007
Feldner, P., Merle, B., & Göken, M. (2018). Superplastic deformation behavior of Zn-22% Al alloy investigated by nanoindentation at elevated temperatures. Materials and Design, 153, 71-79. https://dx.doi.org/10.1016/j.matdes.2018.05.008
Houlle, F., Walsh, F., Prakash, A., & Bitzek, E. (2018). Atomistic Simulations of Compression Tests on gamma-Precipitate Containing Ni3Al Nanocubes. (pp. 4158-4166). SPRINGER.
Makineni, S.K., Lenz, M., Kontis, P., Li, Z., Kumar, A., Felfer, P.,... Gault, B. (2018). Correlative Microscopy-Novel Methods and Their Applications to Explore 3D Chemistry and Structure of Nanoscale Lattice Defects: A Case Study in Superalloys. Jom, 70(9), 1736-1743. https://dx.doi.org/10.1007/s11837-018-2802-7
Huang, C.X., Wang, Y.F., Ma, X.L., Yin, S., Höppel, H.W., Göken, M.,... Zhu, Y.T. (2018). Interface affected zone for optimal strength and ductility in heterogeneous laminate. Materials Today, 21(7), 713-719. https://dx.doi.org/10.1016/j.mattod.2018.03.006
Cormier, J., Rae, C., Neumeier, S., Hardy, M., & Reed, R. (2018). Superalloys and Their Applications Foreword. SPRINGER.
Freund, L., Stark, A., Kirchmayer, A., Schell, N., Pyczak, F., Göken, M., & Neumeier, S. (2018). The Effect of a Grain Boundary Pinning B2 Phase on Polycrystalline Co-Based Superalloys with Reduced Density. Metallurgical and Materials Transactions A-Physical Metallurgy and Materials Science, 49A(9), 4070-4078. https://dx.doi.org/10.1007/s11661-018-4757-2
Liebig, J.P., Krauß, S., Göken, M., & Merle, B. (2018). Influence of stacking fault energy and dislocation character on slip transfer at coherent twin boundaries studied by micropillar compression. Acta Materialia, 154, 261-272. https://dx.doi.org/10.1016/j.actamat.2018.05.037
Freund, L., Stark, A., Pyczak, F., Schell, N., Göken, M., & Neumeier, S. (2018). The grain boundary pinning effect of the mu phase in an advanced polycrystalline γ/γ′ Co-base superalloy. Journal of Alloys and Compounds, 753, 333-342. https://dx.doi.org/10.1016/j.jallcom.2018.04.204
Merle, B., Kraus, X., Tallawi, M., Scharfe, B., El Fray, M., Aifantis, K.E.,... Göken, M. (2018). Dynamic mechanical characterization of poly(glycerol sebacate)/poly (butylene succinate-butylene dilinoleate) blends for cardiac tissue engineering by flat punch nanoindentation. Materials Letters, 221, 115-118. https://dx.doi.org/10.1016/j.matlet.2018.03.051
Medvedev, A.E., Lapovok, R., Koch, E., Höppel, H.W., & Göken, M. (2018). Optimisation of interface formation by shear inclination: Example of aluminium-copper hybrid produced by ECAP with back-pressure. Materials and Design, 146, 142-151. https://dx.doi.org/10.1016/j.matdes.2018.03.021
Merle, B., & Höppel, H.W. (2018). Microscale High-Cycle Fatigue Testing by Dynamic Micropillar Compression Using Continuous Stiffness Measurement. Experimental Mechanics, 58(3), 465-474. https://dx.doi.org/10.1007/s11340-017-0362-3


Publications in addition (Download BibTeX)

Go to first page Go to previous page 1 of 3 Go to next page Go to last page

Mughrabi, H. (2016). The a-factor in the Taylor flow-stress law in monotonic, cyclic and quasi stationary deformations: Dependence on slip mode, dislocation arrangement and density. Current Opinion in Solid State & Materials Science. https://dx.doi.org/10.1016/j.cossms.2016.07.001
Blum, W., Eisenlohr, P., & Hu, J. (2016). Interpretation of unloading tests on nanocrystalline Cu in terms of two mechanisms of deformation. Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing, 665, 171-174. https://dx.doi.org/10.1016/j.msea.2016.04.013
Antolovich, S.D., & Mughrabi, H. (2016). In Memoriam Claude Bathias 1938–2015. International Journal of Fatigue, 93, 215-215. https://dx.doi.org/10.1016/j.ijfatigue.2016.03.007
Mughrabi, H., & Antolovich, S.D. (2016). A tribute to Claude Bathias – Highlights of his pioneering work in Gigacycle Fatigue. International Journal of Fatigue, 93, 217-223. https://dx.doi.org/10.1016/j.ijfatigue.2016.04.020
Favier, V., Blanche, A., Wang, C., Ngoc Lam Phung, ., Ranc, N., Wagner, D.,... Mughrabi, H. (2016). Very high cycle fatigue for single phase ductile materials: Comparison between α-iron, copper and α-brass polycrystals. International Journal of Fatigue, 93, 326-338. https://dx.doi.org/10.1016/j.ijfatigue.2016.05.034
Blum, W., Dvorak, J., Kral, P., Eisenlohr, P., & Sklenicka, V. (2015). Correct Interpretation of Creep Rates: A Case Study of Cu. Journal of Materials Science & Technology, 31, 1065-1068. https://dx.doi.org/10.1016/j.jmst.2015.09.012
Mughrabi, H. (2015). Microstructural mechanisms of cyclic deformation, fatigue crack initiation and early crack growth. Philosophical Transactions of the Royal Society A-Mathematical Physical and Engineering Sciences, 373(2038). https://dx.doi.org/10.1098/rsta.2014.0132
Blum, W., Dvorak, J., Kral, P., Petrenec, M., Eisenlohr, P., & Sklenicka, V. (2015). In situ study of microstructure and strength of severely predeformed pure Cu in deformation at 573K. Philosophical Magazine, 95, 3696-3711. https://dx.doi.org/10.1080/14786435.2015.1096025
Sun, Z., Van Petegem, S., Cervellino, A., Durst, K., Blum, W., & Van Swygenhoven, H. (2015). Dynamic recovery in nanocrystalline Ni. Acta Materialia, 91, 91-100. https://dx.doi.org/10.1016/j.actamat.2015.03.033
Blum, W., Dvorak, J., Kral, P., Eisenlohr, P., & Sklenicka, V. (2014). Effect of grain refinement by ECAP on creep of pure Cu. Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing, 590, 423-432. https://dx.doi.org/10.1016/j.msea.2013.10.022
Blum, W., Dvorak, J., Kral, P., Eisenlohr, P., & Sklenicka, V. (2014). What is "stationary" deformation of pure Cu? Journal of Materials Science, 49(8), 2987-2997. https://dx.doi.org/10.1007/s10853-013-7983-4
Mughrabi, H. (2014). The importance of sign and magnitude of γ/γ′ lattice misfit in superalloys - With special reference to the new γ′-hardened cobalt-base superalloys. Acta Materialia, 81, 21-29. https://dx.doi.org/10.1016/j.actamat.2014.08.005
Mughrabi, H. (2014). Comment on 'Constant intermittent flow of dislocations: Central problems in plasticity' by L. M. Brown. Journal of Materials Science & Technology, 30(1), 123-126. https://dx.doi.org/10.1179/1743284713Y.0000000224
Phung, N.L., Favier, V., Ranc, N., Vales, F., & Mughrabi, H. (2014). Very high cycle fatigue of copper: Evolution, morphology and locations of surface slip markings. International Journal of Fatigue, 63, 68-77. https://dx.doi.org/10.1016/j.ijfatigue.2014.01.007
Mughrabi, H. (2013). Microstructural fatigue mechanisms: Cyclic slip irreversibility, crack initiation, non-linear elastic damage analysis. International Journal of Fatigue, 57, 2-8. https://dx.doi.org/10.1016/j.ijfatigue.2012.06.007
Rahim, M., Frenzel, J., Frotscher, M., Pfetzing-Micklich, J., Steegmueller, R., Wohlschloegel, M.,... Eggeler, G. (2013). Impurity levels and fatigue lives of pseudoelastic NiTi shape memory alloys. Acta Materialia, 61(10), 3667-3686. https://dx.doi.org/10.1016/j.actamat.2013.02.054
Mughrabi, H. (2013). Cyclic strain rate effects in fatigued face-centred and body-centred cubic metals. Philosophical Magazine, 93(28-30), 3821-3834. https://dx.doi.org/10.1080/14786435.2013.779396
Mughrabi, H. (2013). Damage mechanisms and fatigue lives: From the low to the very high cycle regime. Procedia Engineering, 55, 636-644. https://dx.doi.org/10.1016/j.proeng.2013.03.307
Mompiou, F., Caillard, D., Legros, M., & Mughrabi, H. (2012). In situ TEM observations of reverse dislocation motion upon unloading in tensile-deformed UFG aluminium. Acta Materialia, 60(8), 3402-3414. https://dx.doi.org/10.1016/j.actamat.2012.02.049
Blum, W., & Eisenlohr, P. (2011). Structure evolution and deformation resistance in production and application of ultrafine-grained materials - The concept of steady-state grains. Materials Science Forum, 683, 163-181. https://dx.doi.org/10.4028/www.scientific.net/MSF.683.163

Last updated on 2019-18-02 at 14:03