Preceramic paper-derived SiCf/SiCp composites obtained by spark plasma sintering: Processing, microstructure and mechanical properties

Li K, Kashkarov E, Syrtanov M, Sedanova E, Ivashutenko A, Lider A, Fan P, Yuan D, Travitzky N (2020)


Publication Type: Journal article

Publication year: 2020

Journal

Book Volume: 13

Article Number: 607

Journal Issue: 3

DOI: 10.3390/ma13030607

Abstract

Ceramic matrix composites (CMCs) based on silicon carbide (SiC) are promising materials for applications as structural components used under high irradiation flux and high temperature conditions. The addition of SiC fibers (SiCf) may improve both the physical and mechanical properties of CMCs and lead to an increase in their tolerance to failure. This work describes the fabrication and characterization of novel preceramic paper-derived SiCf/SiCp composites fabricated by spark plasma sintering (SPS). The sintering temperature and pressure were 2100 °C and 20-60 MPa, respectively. The content of fibers in the composites was approx. 10 wt. %. The matrix densification and fiber distribution were examined by X-ray computed tomography and scanning electron microscopy. Short processing time avoided the destruction of SiC fibers during SPS. The flexural strength of the fabricated SiCf/SiCp composites at room temperature varies between 300 and 430 MPa depending on the processing parameters and microstructure of the fabricated composites. A quasi-ductile fracture behavior of the fabricated composites was observed.

Authors with CRIS profile

Involved external institutions

How to cite

APA:

Li, K., Kashkarov, E., Syrtanov, M., Sedanova, E., Ivashutenko, A., Lider, A.,... Travitzky, N. (2020). Preceramic paper-derived SiCf/SiCp composites obtained by spark plasma sintering: Processing, microstructure and mechanical properties. Materials, 13(3). https://doi.org/10.3390/ma13030607

MLA:

Li, Ke, et al. "Preceramic paper-derived SiCf/SiCp composites obtained by spark plasma sintering: Processing, microstructure and mechanical properties." Materials 13.3 (2020).

BibTeX: Download