Novel Hybrid Printing of Porous TiC/Ti6Al4V Composites
Yadav P, Bock T, Fu Z, Lorenz H, Gotman I, Greil P, Travitzky N (2019)
Publication Type: Journal article
Publication year: 2019
Journal
Article Number: 1900336
Abstract
Porous TiC/Ti6Al4V composite samples are fabricated by novel hybrid 3D-printing (3DP)/sintering method using a blend of Ti6Al4V and dextrin powders as a precursor material. TiC/Ti6Al4V samples are 3D-printed with two different layer thicknesses of 0.150 and 0.175 mm, and subsequently sintered at various sintering temperatures and dwell times. X-ray analysis of the fabricated composites shows the presence of Ti and TiC. The maximum Young's modulus of porous TiC/Ti6Al4V samples is found to be ≈51 GPa. An overall porosity of the sintered samples ranges from 12% to 35% with a pore size of 65–160 μm. The bending strength ranges from ≈80 to ≈285 MPa depending on the sintering parameters. The compressive strength and hardness of the obtained composites are also reported. Binder jetting 3DP process overcomes the problem of fabricating complex structures and has an edge over conventional techniques such as casting, machining, etc. Several complex-shaped models are fabricated to demonstrate the net-shape capability of this approach.
Authors with CRIS profile
Pinku Yadav
Lehrstuhl für Glas und Keramik (WW3)
Zongwen Fu
Lehrstuhl für Glas und Keramik (WW3)
Hannes Lorenz
Lehrstuhl für Glas und Keramik (WW3)
Peter Greil
Lehrstuhl für Glas und Keramik (WW3)
Nahum Travitzky
Lehrstuhl für Glas und Keramik (WW3)
Involved external institutions
Israel (IL)How to cite
APA:
Yadav, P., Bock, T., Fu, Z., Lorenz, H., Gotman, I., Greil, P., & Travitzky, N. (2019). Novel Hybrid Printing of Porous TiC/Ti6Al4V Composites. Advanced Engineering Materials. https://doi.org/10.1002/adem.201900336
MLA:
Yadav, Pinku, et al. "Novel Hybrid Printing of Porous TiC/Ti6Al4V Composites." Advanced Engineering Materials (2019).
BibTeX: Download