Percutaneous punctures with MR imaging guidance: Comparison between MR imaging-enhanced fluoroscopic guidance and real-time MR imaging guidance

Meyer B, Brost A, Kraitchman D, Gilson WD, Strobel N, Hornegger J, Lewin J, Wacker F (2013)


Publication Type: Journal article, Original article

Publication year: 2013

Journal

Original Authors: Meyer B., Wacker F., Brost A., Hornegger J., Kraitchman D., Lewin J., Gilson W., Strobel N.

Publisher: Radiological Society of North America (RSNA)

Book Volume: 266

Pages Range: 912-919

Journal Issue: 3

DOI: 10.1148/radiol.12120117

Abstract

Purpose: To evaluate and compare the technical accuracy and feasibility of magnetic resonance (MR) imaging-enhanced fluoroscopic guidance and real-time MR imaging guidance for percutaneous puncture procedures in phantoms and animals. Materials and Methods: The experimental protocol was approved by the institutional animal care and use committee. Punctures were performed in phantoms, aiming for markers (20 each for MR imaging-enhanced fluoroscopic guidance and real-time MR imaging guidance), and pigs, aiming for anatomic landmarks (10 for MR imaging-enhanced fluoroscopic guidance and five for MR imaging guidance). To guide the punctures, T1-weighted three-dimensional (3D) MR images of the phantom or pig were acquired. Additional axial and coronal T2- weighted images were used to visualize the anatomy in the animals. For MR imaging-enhanced fluoroscopic guidance, phantoms and pigs were transferred to the fluoroscopic system after initial MR imaging and C-arm computed tomography (CT) was performed. C-arm CT and MR imaging data sets were coregistered. Prototype navigation software was used to plan a puncture path with use of MR images and to superimpose it on fluoroscopic images. For realtime MR imaging, an interventional MR imaging prototype for interactive real-time section position navigation was used. Punctures were performed within the magnet bore. After completion, 3D MR imaging was performed to evaluate the accuracy of insertions. Puncture durations were compared by using the log-rank test. The Mann-Whitney U test was applied to compare the spatial errors. Results: In phantoms, the mean total error was 8.6 mm ± 2.8 with MR imaging-enhanced fluoroscopic guidance and 4.0 mm ± 1.2 with real-time MR imaging guidance (P < .001). The mean puncture time was 2 minutes 10 seconds ± 44 seconds with MR imaging- enhanced fluoroscopic guidance and 37 seconds ± 14 with real-time MR imaging guidance (P < .001). In the animal study, a tolerable distance (<1 cm) between target and needle tip was observed for both MR imaging-enhanced fluoroscopic guidance and real-time MR imaging guidance. The mean total error was 7.7 mm ± 2.4 with MR imaging-enhanced fluoroscopic guidance and 7.9 mm ± 4.9 with real-time MR imaging guidance (P = .77). The mean puncture time was 5 minutes 43 seconds ± 2 minutes 7 seconds with MR imaging-enhanced fluoroscopic guidance and 5 minutes 14 seconds ± 2 minutes 25 seconds with real-time MR imaging guidance (P = .68). Conclusion: Both MR imaging-enhanced fluoroscopic guidance and real-time MR imaging guidance demonstrated reasonable and similar accuracy in guiding needle placement to selected targets in phantoms and animals. © RSNA, 2012.

Authors with CRIS profile

Involved external institutions

How to cite

APA:

Meyer, B., Brost, A., Kraitchman, D., Gilson, W.D., Strobel, N., Hornegger, J.,... Wacker, F. (2013). Percutaneous punctures with MR imaging guidance: Comparison between MR imaging-enhanced fluoroscopic guidance and real-time MR imaging guidance. Radiology, 266(3), 912-919. https://dx.doi.org/10.1148/radiol.12120117

MLA:

Meyer, Bernhard, et al. "Percutaneous punctures with MR imaging guidance: Comparison between MR imaging-enhanced fluoroscopic guidance and real-time MR imaging guidance." Radiology 266.3 (2013): 912-919.

BibTeX: Download