Zentralinstitut für Neue Materialien und Prozesstechnik

Description:Zentralinstitut für Neue Materialien und Prozesstechnik

Address:
Dr.-Mack-Straße 81
90762 Fürth


Publications (Download BibTeX)
1 of 8

Journal article
Laudenbach J, Schmid D, Herziger F, et al. (2017)
Diameter dependence of the defect-induced Raman modes in functionalized carbon nanotubes
Carbon

Journal article
Markl M, Lodes M, Franke M, et al. (2017)
Additive Fertigung durch selektives Elektronenstrahlschmelzen
Schweissen und Schneiden

Journal article
Vecera P, Eigler S, Kolesnik-Gray M, et al. (2017)
Degree of functionalisation dependence of individual Raman intensities in covalent graphene derivatives
Scientific Reports

Journal article
Warmuth F, Adler L, Osmanlic F, et al. (2017)
Fabrication and characterisation of a fully auxetic 3D lattice structure via selective electron beam melting
Smart Materials and Structures

Journal article
Markl M, Lodes M, Franke M, et al. (2017)
Additive manufacturing using selective electron beam melting
Welding and Cutting

Journal article
Gibaja C, Rodriguez-San-Miguel D, Ares P, et al. (2016)
Few-Layer Antimonene by Liquid-Phase Exfoliation
Angewandte Chemie (International ed. in English)

Journal article
Plötz S, Nowak R, Lohmüller A, et al. (2016)
Wettability of Low Weight Borides by Commercial Aluminum Alloys − A Basis for Metal Matrix Composite Fabrication
Advanced Engineering Materials

Journal article
Schäfer R, Weber K, Kolesnik-Gray M, et al. (2016)
Substrate-Modulated Reductive Graphene Functionalization
Angewandte Chemie

Journal article
Vecera P, Holzwarth J, Mundloch U, et al. (2016)
Solvent-driven electron trapping and mass transport in reduced graphites to access perfect graphene
Nature Communications

Journal article
Osmanlic F, Körner C (2016)
Lattice Boltzmann method for Oldroyd-B fluids
Computers & Fluids

Journal article
Raab S, Guschlbauer R, Lodes M, et al. (2016)
Thermal and Electrical Conductivity of 99.9% Pure Copper Processed via Selective Electron Beam Melting
Advanced Engineering Materials

Conference contribution
Huenert D, Pröbstle M, Casanova A, et al. - Ed.: M. Hardy, E. Huron, U. Glatzel, et al. (2016)
ATI718PLUS® - New nickel based disc alloy and its capability
Superalloys 2016: Proceedings of the 13th Intenational Symposium of Superalloys

Journal article
Schäfer R, Dasler D, Mundloch U, et al. (2016)
Basic Insights into Tunable Graphene Hydrogenation
Journal of the American Chemical Society

Journal article
Schwieger W, Thangaraj S, Warmuth F, et al. (2016)
Fabrication and pressure drop behavior of novel monolithic structures with zeolitic architectures
Chemical Engineering Journal

Journal article
Knirsch K, Schäfer R, Hauke F, et al. (2016)
Mono- and Ditopic Bisfunctionalization of Graphene
Angewandte Chemie-International Edition

Journal article
Abellan Saez G, Lloret Segura VJ, Mundloch U, et al. (2016)
Noncovalent Functionalization of Black Phosphorus
Angewandte Chemie (International ed. in English)

Journal article
Carrasco J, Romero J, Varela M, et al. (2016)
Alkoxide-intercalated NiFe-layered double hydroxides magnetic nanosheets as efficient water oxidation electrocatalysts
Inorganic Chemistry Frontiers

Journal article
Adler L, Warmuth F, Lodes M, et al. (2016)
The effect of a negative Poisson's ratio on thermal stresses in cellular metallic structures
Smart Materials and Structures



Additional related publications
1 of 2

Journal article
Alexeev I, Wu J, Karg M, et al. (2017)
Determination of laser beam focus position based on secondary speckles pattern analysis
Applied Optics

Journal article
Ahuja B, Schaub A, Junker D, et al. (2016)
A ROUND ROBIN STUDY FOR LASER BEAM MELTING IN METAL POWDER BED
South African Journal of Industrial Engineering

Conference contribution
Karg M, Hentschel O, Ahuja B, et al. - Ed.: Igor Drstvenšek, Dietmar Drummer, Michael Schmidt (2016)
Comparison of process characteristics and resulting microstructures of maraging steel 1.2709 in Additive Manufacturing via Laser Metal Deposition and Laser Beam Melting in Powder Bed
6th International Conference on Additive Technologies

Conference contribution
Karg M, Ahuja B, Schmidt J, et al. - Ed.: Igor Drstvenšek, Dietmar Drummer, Michael Schmidt (2016)
Laser Beam Melting in Powder Bed of nonspherical aluminium microparticles dry coated with metal nanoparticles
Proceedings [Elektronski vir] / 6th International Conference on Additive Technologies iCAT2016

Conference contribution
Ahuja B, Schaub A, Karg M, et al. - Ed.: Henry Helvajian, Alberto Piqué, Martin Wegener, et al. (2015)
High Power Laser Beam Melting of Ti-6Al-4V on Formed Sheet Metal to achieve Hybrid structures
Proc. of SPIE Vol. 9353, 93530X

Conference contribution
Karg M, Ahuja B, Schmidt M (2015)
Strategy towards tailored high-performance metal materials for additive manufacturing
1st International Symposium on Additive Manufacturing, IWS Dresden

Conference contribution
Ahuja B, Karg M, Schmidt M - Ed.: Henry Helvajian, Alberto Piqué, Martin Wegener, et al. (2015)
Additive Manufacturing in Production – Challenges and Opportunities
Proc. of SPIE Vol. 9353, 935304

Conference contribution
Karg M, Ahuja B, Schaub A, et al. (2015)
Effect of process conditions on mechanical behavior of aluminium wrought alloy EN AW-2618 additively manufactured by Laser Beam Melting in powder bed
Proceedings of Laser in Manfacturing Conference 2015

Journal article
Eigler S, Hof F, Enzelberger-Heim M, et al. (2014)
Statistical raman microscopy and atomic force microscopy on heterogeneous graphene obtained after reduction of graphene oxide
Journal of Physical Chemistry C

Journal article
Karg M, Ahuja B, Hentschel O, et al. (2014)
Local Hardness Variation of Ti50Cu32Ni15Sn3 Processed by Laser Beam Melting (LBM)
International Journal of Recent Contributions from Engineering, Science & IT

Conference contribution
Ahuja B, Karg M, Nagulin K, et al. - Ed.: Igor Drstvensek (2014)
Laser beam melting of high strength al-uminium alloys EN AW-6061 and EN AW-6082
Proceedings of 5th International Conference on Additive Technologies

Conference contribution
Karg M, Ahuja B, Kuryntsev S, et al. - Ed.: Igor Drstvensek (2014)
Laser Beam Melting of Amorphous Metals
Proceedings of 5th International Conference on Additive Technologies

Conference contribution
Schaub A, Ahuja B, Karg M, et al. - Ed.: Axel Demmer (2014)
Fabrication and Characterization of Laser Beam Melted Ti-6Al-4V Geometries on Sheet Metal
Proceedings DDMC 2014 Fraunhofer direct digital Manufacturing conference

Journal article
Sachs M, Hentschel O, Schmidt J, et al. (2014)
Production of Al/Cu-Particles and their potential for processing by Laser Beam Melting (LBM)
Physics Procedia

Conference contribution
Karg M, Ahuja B, Kuryntsev S, et al. - Ed.: Dave Bourrell (2014)
Processability of high strength Aluminium-Copper alloys AW-2022 and 2024 by Laser Beam Melting in Powder Bed
Proceedings of the 25th Annual International Solid Freeform Symposium

Conference contribution
Karg M, Laumer T, Schmidt M - Ed.: Van der Merwe, A., Dimitrov, et al. (2013)
Additive Manufacturing of Gradient and Multimaterial Components
Archive of COMA 2013

Journal article
Eigler S, Hu Y, Ishii Y, et al. (2013)
Controlled functionalization of graphene oxide with sodium azide
Nanoscale

Share link
Last updated on 2016-05-05 at 04:58
PDF downloaded successfully