Combining multi-scale surface texturing and DLC coatings for improved tribological performance of 3D printed polymers

Marian M, Zambrano D, Rothammer B, Waltenberger V, Boidi G, Krapf A, Merle B, Stampfl J, Rosenkranz A, Gachot C, Grützmacher P (2023)

Publication Type: Journal article

Publication year: 2023

Journal

Surface & Coatings Technology Elsevier

Original Authors: Max Marian, Dario F. Zambrano, Benedict Rothammer, Valentin Waltenberger, Guido Boidi, Anna Krapf, Benoit Merle, Jürgen Stampfl, Andreas Rosenkranz, Carsten Gachot, Philipp G. Grützmacher

Book Volume: 466

Pages Range: 129682

Article Number: 129682

DOI: 10.1016/j.surfcoat.2023.129682

Abstract

Polymer components fabricated by additive manufacturing typically show only moderate strength and low temperature stability, possibly leading to severe wear and short lifetimes especially under dry tribological sliding. To tackle these shortcomings, we investigated the combination of single- and multi-scale textures directly fabricated by digital light processing with amorphous diamond-like carbon (DLC) coatings. The topography of the samples and conformity of the coatings on the textures are assessed and their tribological behaviour under dry conditions is studied. We demonstrate that the surface textures have a detrimental tribological effect on the uncoated samples. This changes with the application of DLC coatings since friction substantially reduces and wear of the textures is not observed anymore. These trends are attributed to the protection of the underlying polymer substrate by the coatings and a reduced contact area. The best tribological performance is found for a coating with highest hardness and hardness-to-elasticity ratios. Moreover, multi-scale textures perform slightly better than single-scale textures due to a smaller real contact area. Summarizing, we verified that the high flexibility and low production costs of 3D printing combined with the excellent mechanical and tribological properties of DLC results in synergistic effects with an excellent performance under dry sliding conditions.

Authors with CRIS profile

Benedict Rothammer Chair of Engineering Design (KTmfk) Anna Krapf Lehrstuhl für Werkstoffwissenschaften (Allgemeine Werkstoffeigenschaften)

Additional Organisation(s)

Lehrstuhl für Werkstoffwissenschaften (Allgemeine Werkstoffeigenschaften)

Involved external institutions

Universidad de Santiago de Chile (USACH) / University of Santiago, Chile CL Chile (CL) Technische Universität Wien / Vienna University of Technology AT Austria (AT) Pontificia Universidad Católica de Chile CL Chile (CL) AC2T Research GmbH AT Austria (AT) Universität Kassel DE Germany (DE)

How to cite

APA:

Marian, M., Zambrano, D., Rothammer, B., Waltenberger, V., Boidi, G., Krapf, A.,... Grützmacher, P. (2023). Combining multi-scale surface texturing and DLC coatings for improved tribological performance of 3D printed polymers. Surface & Coatings Technology, 466, 129682. https://doi.org/10.1016/j.surfcoat.2023.129682

MLA:

Marian, Max, et al. "Combining multi-scale surface texturing and DLC coatings for improved tribological performance of 3D printed polymers." Surface & Coatings Technology 466 (2023): 129682.

BibTeX: Download