Correlation of Microstructure and Properties of Cold Gas Sprayed INCONEL 718 Coatings
Vassen R, Fiebig J, Kalfhaus T, Gibmeier J, Kostka A, Schrüfer S (2020)
Publication Type: Journal article
Publication year: 2020
Journal
Book Volume: 29
Pages Range: 1455-1465
Journal Issue: 6
DOI: 10.1007/s11666-020-00988-w
Abstract
In the cold gas spray process, deposition of particles takes place through intensive plastic deformation upon impact in a solid state at temperatures well below their melting point. The high particle impact velocities and corresponding peening effects can lead to high compressive residual stresses in cold spray coatings. This can be advantageous with regard to mechanical properties as fatigue life and hence, cold spray is an ideal process for repair applications. In this study, INCONEL 718 particles were cold sprayed by using nitrogen as propellant gas. The deposited coatings with different thicknesses were characterized using electron microscopy techniques to study grain refinement and precipitates in the coating. In addition, depth-resolved residual stress measurements have been performed by the incremental hole drilling method. The residual stress depth profiles in the coatings indicate compressive residual stresses of several hundred MPa which are hardly influenced by the coating thickness. In addition, large compressive stress levels are found in surface-near regions of the substrate due to the grit blasting process. Furthermore, a post-heat treatment analysis was performed to investigate its influence on residual stresses and bonding strength. These findings are used to develop a consistent explanation of the dependence of strength values on thickness.
Authors with CRIS profile
Additional Organisation(s)
Involved external institutions
Forschungszentrum Jülich / Research Centre Jülich (FZJ)
Germany (DE)
Karlsruhe Institute of Technology (KIT)
Germany (DE)
Rolls-Royce Deutschland Ltd & Co KG
Germany (DE)
Ruhr-Universität Bochum (RUB)
Germany (DE)
Germany (DE)
Karlsruhe Institute of Technology (KIT)
Germany (DE)
Rolls-Royce Deutschland Ltd & Co KG
Germany (DE)
Ruhr-Universität Bochum (RUB)
Germany (DE)
How to cite
APA:
Vassen, R., Fiebig, J., Kalfhaus, T., Gibmeier, J., Kostka, A., & Schrüfer, S. (2020). Correlation of Microstructure and Properties of Cold Gas Sprayed INCONEL 718 Coatings. Journal of Thermal Spray Technology, 29(6), 1455-1465. https://dx.doi.org/10.1007/s11666-020-00988-w
MLA:
Vassen, R., et al. "Correlation of Microstructure and Properties of Cold Gas Sprayed INCONEL 718 Coatings." Journal of Thermal Spray Technology 29.6 (2020): 1455-1465.
BibTeX: Download