Understanding the high creep resistance of mri 230d magnesium alloy through nanoindentation and atom probe tomography

Matschkal D, Tuengerthal P, Lamm S, Göken M, Höppel HW, Felfer P (2021)

Publication Type: Journal article

Publication year: 2021

Journal

Metals MDPI

Book Volume: 11

Article Number: 1727

Journal Issue: 11

DOI: 10.3390/met11111727

Abstract

Due to their low density, magnesium alloys are very appealing for light-weight construc-tions. However, the use of the most common magnesium alloy, AZ91 (Mg 9 wt.% Al, 1 wt.% Zn), is limited to temperatures below 150◦ C due to creep failure. Several alloys with an improved creep resistance have been developed in the past, for example the alloy MRI 230D or Ca-alloyed AZ91 variants. However, there is an ongoing discussion in the literature regarding the mechanisms of the improved creep resistance. One factor claimed to be responsible for the improved creep resistance is the intermetallic phases which form during casting. Another possible explanation is an increased creep resistance due to the formation of precipitates. To gain more insight into the improved creep resistance of MRI 230D, nanoindentation measurements have been performed on the different phases of as-cast, creep-deformed and heat-treated samples of MRI 230D and Ca-alloyed AZ91 variants. These nanoindentation measurements clearly show that the intermetallic phase (IP) of the alloy MRI 230D does not lose strength during creep deformation in contrast to the Ca-alloyed AZ91 variants. High-temperature nanoindentation measurements performed at 200◦ C clearly show that the intermetallic phases of the MRI 230D alloy maintain their strength. This is in clear contrast to the Ca-alloyed AZ91 variants, where the IP is significantly softer at 200◦ C than at room temperature. Atom probe measurements have been used to gain insight into the differences in terms of chemical composition between the IPs of MRI 230D and the Ca-alloyed AZ91 variants in order to understand the dissimilar behaviour in terms of strength loss with increasing temperature.

Authors with CRIS profile

Dorothea Matschkal Lehrstuhl für Werkstoffwissenschaften (Allgemeine Werkstoffeigenschaften) Steffen Lamm Lehrstuhl für Werkstoffwissenschaften (Allgemeine Werkstoffeigenschaften) Mathias Göken Lehrstuhl für Werkstoffwissenschaften (Allgemeine Werkstoffeigenschaften) Heinz Werner Höppel Lehrstuhl für Werkstoffwissenschaften (Allgemeine Werkstoffeigenschaften) Peter Felfer Professur für Atom Probe Tomography

How to cite

APA:

Matschkal, D., Tuengerthal, P., Lamm, S., Göken, M., Höppel, H.W., & Felfer, P. (2021). Understanding the high creep resistance of mri 230d magnesium alloy through nanoindentation and atom probe tomography. Metals, 11(11). https://dx.doi.org/10.3390/met11111727

MLA:

Matschkal, Dorothea, et al. "Understanding the high creep resistance of mri 230d magnesium alloy through nanoindentation and atom probe tomography." Metals 11.11 (2021).

BibTeX: Download