The effect of TiH2 particle size on the morphology of Al-foam produced by PM process

Beitrag in einer Fachzeitschrift
(Originalarbeit)


Details zur Publikation

Autor(en): Ibrahim A, Körner C, Singer R
Zeitschrift: Advanced Engineering Materials
Jahr der Veröffentlichung: 2008
Band: 10
Heftnummer: 9
Seitenbereich: 845-848
ISSN: 1438-1656
Sprache: Englisch


Abstract


A study was conducted to investigate the effect of titanium hydroxide (TiH) particle size on the morphology of aluminum (Al)-foam produced by PM process. The investigation was an approach to utilize the altering of the decomposition kinetics of TiH, based on its particulate sizes. TiH type N was ground by using a Retsch ball mill type S100, to obtain a wide variety of TiH particulate sizes. Particle size and size distributions for the supplied and milled powders were measured, using a Malvern MasterSizer 2000 laser particle size analyzer. Differential Scanning Calorimetry (DSC) and Thermogravimetric analysis (TGA) were also carried out for TiH powders with different particle sizes, using Netzsch STA 409 type equipment.



FAU-Autoren / FAU-Herausgeber

Körner, Carolin Prof. Dr.-Ing.
Lehrstuhl für Werkstoffwissenschaften (Werkstoffkunde und Technologie der Metalle)
Singer, Robert Prof. Dr.-Ing.
Lehrstuhl für Werkstoffwissenschaften (Werkstoffkunde und Technologie der Metalle)


Zitierweisen

APA:
Ibrahim, A., Körner, C., & Singer, R. (2008). The effect of TiH2 particle size on the morphology of Al-foam produced by PM process. Advanced Engineering Materials, 10(9), 845-848. https://dx.doi.org/10.1002/adem.200800139

MLA:
Ibrahim, Ahmed, Carolin Körner, and Robert Singer. "The effect of TiH2 particle size on the morphology of Al-foam produced by PM process." Advanced Engineering Materials 10.9 (2008): 845-848.

BibTeX: 

Zuletzt aktualisiert 2018-08-09 um 07:10