Detailed investigations of ZnO photoelectrodes preparation for dye sensitized solar cells

Marczak R, Werner F, Ahmad R, Lobaz V, Guldi DM, Peukert W (2011)


Publication Type: Journal article, Original article

Publication year: 2011

Journal

Original Authors: Marczak R., Werner F., Ahmad R., Lobaz V., Guldi D.M., Peukert W.

Publisher: American Chemical Society

Book Volume: 27

Pages Range: 3920-3929

Journal Issue: 7

DOI: 10.1021/la1042876

Abstract

Wurtzite ZnO hexagonal nanopyramids were successfully synthesized in the liquid phase from homogeneous methanolic solutions of zinc acetate and tetramethylammonium hydroxide at an excess of zinc ions. The formation and properties of the nanocrystals were examined as a function of synthesis conditions. No significant influence of the [Zn ]/[OH ] ratio was noticed on the final particle size, in spite of increased amounts of OH ions, which tend to accelerate the particle nucleation and growth. Nevertheless, the reactant concentration ratio influences the surface properties of the ZnO nanocrystals. Mesoporous ZnO films were prepared by doctor blading ethanolic pastes containing ZnO nanoparticles and ethyl cellulose onto FTO conductive glass substrate followed by calcination. Additionally, the influence of a plasticizer (triacetin)-used during the paste preparation-on the film quality was investigated. A higher content of ZnO nanoparticles and plasticizer in the pastes improved the film quality. Four different temperatures (i.e., 400, 425, 450, and 475 °C) were used for the film calcination and their influence on the structural properties of the films was characterized. In principle, increasing the calcination temperature goes hand in hand with an increase of particle size, as well as the pore diameter and reduction of the surface area. Suitable mesoporous films were employed as photoanodes in dye sensitized solar cells (DSSCs). In order to assess the effect of the varied parameters on complete DSSC devices-using cis-diisothiocyanato-bis(2,2′- bipyridyl-4,4′-dicarboxylato) ruthenium(II)bis(tetrabutylammonium (N719) as a sensitizer-incident photon to current efficiency (IPCE) and current voltage measurements were carried out. The IPCE measurements confirmed photoinduced electron injection from the dye, reaching IPCE values up to 76%. Furthermore, current-voltage characteristics of complete cells emphasized the importance of the proper preparation methods and temperatures. These features are important assets for the preparation of nanocrystalline ZnO based photoelectrodes and for improving the DSSC performance. © 2011 American Chemical Society.

Authors with CRIS profile

Additional Organisation(s)

How to cite

APA:

Marczak, R., Werner, F., Ahmad, R., Lobaz, V., Guldi, D.M., & Peukert, W. (2011). Detailed investigations of ZnO photoelectrodes preparation for dye sensitized solar cells. Langmuir, 27(7), 3920-3929. https://doi.org/10.1021/la1042876

MLA:

Marczak, Renata, et al. "Detailed investigations of ZnO photoelectrodes preparation for dye sensitized solar cells." Langmuir 27.7 (2011): 3920-3929.

BibTeX: Download