Self-calibration method for a robotic based 3D scanning system

Beitrag bei einer Tagung
(Konferenzbeitrag)


Details zur Publikation

Autorinnen und Autoren: Wagner M, Heß P, Reitelshöfer S, Franke J
Jahr der Veröffentlichung: 2015
Tagungsband: 2015 IEEE 20th Conference on Emerging Technologies Factory Automation (ETFA)
Seitenbereich: 1-6


Abstract


This paper describes a method for extrinsic sensor calibration for a 2D laser profile sensor on a robot arm used as a robot based 3D scanning system. In order to establish a relationship between the sensor measurements and the robot positions, the transformation between the robot flange and the sensor reference frame are determined. The developed calibration method is implemented as an automated self-calibration. It is based on the use of a pin as a fixed reference. The robot is aligned to the tip of the pin automatically with certain orientations. The sensor transformation is calculated based on six recorded robot positions. Finally, the accuracy of the calibration is determined with an additional robot position.



FAU-Autorinnen und Autoren / FAU-Herausgeberinnen und Herausgeber

Franke, Jörg Prof. Dr.-Ing.
Lehrstuhl für Fertigungsautomatisierung und Produktionssystematik
Reitelshöfer, Sebastian
Lehrstuhl für Fertigungsautomatisierung und Produktionssystematik
Wagner, Maximilian
Lehrstuhl für Fertigungsautomatisierung und Produktionssystematik


Zitierweisen

APA:
Wagner, M., Heß, P., Reitelshöfer, S., & Franke, J. (2015). Self-calibration method for a robotic based 3D scanning system. In 2015 IEEE 20th Conference on Emerging Technologies Factory Automation (ETFA) (pp. 1-6). Luxembourg, LU.

MLA:
Wagner, Maximilian, et al. "Self-calibration method for a robotic based 3D scanning system." Proceedings of the IEEE 20th Conference on Emerging Technologies & Factory Automation (ETFA), Luxembourg 2015. 1-6.

BibTeX: 

Zuletzt aktualisiert 2018-21-10 um 00:00