Influence of mold Temperature on mold Filling Behavior and Part Properties in Micro Injection molding

Beitrag in einer Fachzeitschrift


Details zur Publikation

Autor(en): Meister S, Drummer D
Zeitschrift: International Polymer Processing
Verlag: Carl Hanser Verlag
Jahr der Veröffentlichung: 2013
Band: 28
Heftnummer: 5
Seitenbereich: 550-557
ISSN: 0930-777X


Abstract


A variety of polymer parts used in microsystems technology is manufactured by injection molding processes. Particularly the high cooling velocity negatively affects the process and the resulting part properties. The scope of this paper is to investigate the influence of the mold temperature during the injection phase on the melt flow and the mold filling as well as on the resulting part properties. The results indicate that an increasing mold temperature supports the filling behavior, although the injection pressure has more impact. An increasing mold temperature also influences the part properties. It was found that a higher mold temperature leads to a more homogeneous and spherulitic structure as well as to an increasing degree of crystallinity. As a consequence the mechanical part properties are affected, too. © Carl Hanser Verlag GmbH & Co. KG.



FAU-Autoren / FAU-Herausgeber

Drummer, Dietmar Prof. Dr.-Ing.
Lehrstuhl für Kunststofftechnik
Meister, Steve
Lehrstuhl für Kunststofftechnik


Zitierweisen

APA:
Meister, S., & Drummer, D. (2013). Influence of mold Temperature on mold Filling Behavior and Part Properties in Micro Injection molding. International Polymer Processing, 28(5), 550-557. https://dx.doi.org/10.3139/217.2804

MLA:
Meister, Steve, and Dietmar Drummer. "Influence of mold Temperature on mold Filling Behavior and Part Properties in Micro Injection molding." International Polymer Processing 28.5 (2013): 550-557.

BibTeX: 

Zuletzt aktualisiert 2018-19-12 um 09:32