Local Hardness Variation of Ti50Cu32Ni15Sn3 Processed by Laser Beam Melting (LBM)

Beitrag in einer Fachzeitschrift


Details zur Publikation

Autorinnen und Autoren: Karg M, Ahuja B, Hentschel O, Schmidt M
Zeitschrift: International Journal of Recent Contributions from Engineering, Science & IT
Verlag: Kassel Univ. Press
Jahr der Veröffentlichung: 2015
Band: 3
Heftnummer: 1
Seitenbereich: 34-38
ISSN: 2197-8581
Sprache: Englisch


Abstract


Amorphous metals which are synonymously called metallic glasses form a rather young group of engineering materials. Compared to crystalline metals they offer unique combinations of properties: tensile strength, hardness, elastic strain, resistance against corrosion and abrasive wear are rather high. In order to minimize crystal growth, rapid solidification from the liquid phase is required. High cooling rates are a characteristic property of the additive manufacturing technology Laser Beam Melting in Powder Bed (LBM). This paper shows first results of processing Ti50Cu32Ni15Sn3 by LBM. Unlike many other alloys with high glass forming ability, it does not contain costly rare earth elements. No literature is known to the authors about

LBM of this material. Because relative density close to 100 % is a prerequisite for producing parts with high mechanical performance, a parameter study was conducted varying scan speed, hatch distance and laser power in wide ranges. The obtained samples are characterized by metallographic sections, hardness measurements and X-ray diffraction. Apart from reaching high relative densities, a wide variation

in Vickers hardness over the length of samples was found. It corresponds to the locally different thermodynamic conditions. Apart from introducing a new material with promising properties to the manufacturing technology of LBM, this might open up a new approach to modify mechanical material properties in a single work piece made from uniform powder by adapting LBM process parameters. Both the

range of applications for LBM as well as the range of geometries producible from amorphous metals might be expanded.


FAU-Autorinnen und Autoren / FAU-Herausgeberinnen und Herausgeber

Ahuja, Bhrigu
Lehrstuhl für Photonische Technologien
Karg, Michael
Lehrstuhl für Photonische Technologien
Schmidt, Michael Prof. Dr.-Ing.
Lehrstuhl für Photonische Technologien


Zusätzliche Organisationseinheit(en)
Sonderforschungsbereich 814/3 Additive Fertigung
Erlangen Graduate School in Advanced Optical Technologies
Zentralinstitut für Neue Materialien und Prozesstechnik


Forschungsbereiche

Additive Fertigung
Lehrstuhl für Photonische Technologien
Optische Technologien
Forschungsschwerpunkt einer Fakultät: Technische Fakultät
Neue Materialien und Prozesse
Forschungsschwerpunkt einer Fakultät: Technische Fakultät


Zitierweisen

APA:
Karg, M., Ahuja, B., Hentschel, O., & Schmidt, M. (2015). Local Hardness Variation of Ti50Cu32Ni15Sn3 Processed by Laser Beam Melting (LBM). International Journal of Recent Contributions from Engineering, Science & IT, 3(1), 34-38. https://dx.doi.org/10.3991/ijes.v3i1.4293

MLA:
Karg, Michael, et al. "Local Hardness Variation of Ti50Cu32Ni15Sn3 Processed by Laser Beam Melting (LBM)." International Journal of Recent Contributions from Engineering, Science & IT 3.1 (2015): 34-38.

BibTeX: 

Zuletzt aktualisiert 2018-21-10 um 13:03