Ti3Si(Al)C2-based ceramics fabricated by reactive melt infiltration with Al70Si30 alloy

Beitrag in einer Fachzeitschrift
(Originalarbeit)


Details zur Publikation

Autor(en): Wang L, Yin X, Fan X, Greil P, Travitzky N
Zeitschrift: Journal of the European Ceramic Society
Verlag: Elsevier
Jahr der Veröffentlichung: 2014
Band: 34
Heftnummer: 6
Seitenbereich: 1493-1499
ISSN: 0955-2219


Abstract


Dense TiSi(Al)C-based ceramics were synthesized using reactive melt infiltration (RMI) of AlSi alloy into the porous TiC preforms. The effects of the infiltration temperature on the microstructure and mechanical properties of the synthesized composites were investigated. All the composites infiltrated at different temperatures were composed of TiSi(Al)C, TiC, SiC, Ti(Al, Si) and Al. With the increase of infiltration temperature from 1050°C to 1500°C, the TiSi(Al)C content increased to 52vol.% and the TiC content decreased to 15vol.%, and the Vickers hardness, flexural strength and fracture toughness of TiSi(Al)C-based composite reached to 9.95GPa, 328MPa and 4.8MPam, respectively. © 2013 Elsevier Ltd.



FAU-Autoren / FAU-Herausgeber

Greil, Peter Prof. Dr.
Lehrstuhl für Werkstoffwissenschaften (Glas und Keramik)
Travitzky, Nahum apl. Prof. Dr.
Lehrstuhl für Werkstoffwissenschaften (Glas und Keramik)


Autor(en) der externen Einrichtung(en)
Northwestern Polytechnical University / 西北工业大学 (NPU/NWPU)


Zitierweisen

APA:
Wang, L., Yin, X., Fan, X., Greil, P., & Travitzky, N. (2014). Ti3Si(Al)C2-based ceramics fabricated by reactive melt infiltration with Al70Si30 alloy. Journal of the European Ceramic Society, 34(6), 1493-1499. https://dx.doi.org/10.1016/j.jeurceramsoc.2013.11.020

MLA:
Wang, Lei, et al. "Ti3Si(Al)C2-based ceramics fabricated by reactive melt infiltration with Al70Si30 alloy." Journal of the European Ceramic Society 34.6 (2014): 1493-1499.

BibTeX: 

Zuletzt aktualisiert 2018-11-10 um 21:50