Failure mechanisms of a tungsten-modified hydrogenated amorphous carbon coating in load-scanning tests

Beitrag in einer Fachzeitschrift
(Originalarbeit)


Details zur Publikation

Autor(en): Hetzner H, Schaufler J, Tremmel S, Durst K, Wartzack S
Zeitschrift: Surface & Coatings Technology
Verlag: Elsevier
Jahr der Veröffentlichung: 2012
Band: 212
Heftnummer: 11
Seitenbereich: 46 - 54
ISSN: 0257-8972
Sprache: Englisch


Abstract


Polished cylindrical specimens of a hardened and tempered cold work steel were coated with a tungsten-modified hydrogenated amorphous carbon coating (a-C:H:W). On a load-scanning test rig, tribological-mechanical tests under dry conditions with coated specimens sliding against identical, but uncoated specimens were performed. Additionally, comparative tests with a-C:H:W coated specimens sliding against a-C:H:W coated specimens were carried out. During each test cycle, the normal load was gradually increased from 13 to 350. N (Hertzian contact pressure of 1.0 to 3.0. GPa). The coefficient of friction was monitored as a function of the normal load, with a significant increase in friction indicating failure of the coating. These tests were repeated and stopped at different total numbers of load cycles. After the tests, a FIB-assisted microscopical analysis in terms of wear and damage of the coating was performed, revealing the (subsurface) failure mechanisms. The results obtained show that at Hertzian pressures of more than 2. GPa and after about eight load cycles, failure of the a-C:H:W coating is initiated by locally accumulated adhesion of steel flakes, repeatedly occurring at random contact pressures in this load range. The adherence of steel goes along with a local increase in friction, inducing the formation of small shear cracks in the coating top layer. Continued crack formation finally results in partial delamination of coating material and disruption of the surface, in affected areas only. Reference tests with the pairing a-C:H:W/a-C:H:W underline that, very much unlike pure hydrogenated amorphous carbon (a-C:H), a-C:H:W is a rather ductile material with the ability to stick to itself. A discussion of this study's results against the background of a similarly conducted previous study of an a-C:H-based coating system reveals some similarities, but also significant differences in the tribological and mechanical behaviour of both types of amorphous carbon. © 2012 Elsevier B.V.



FAU-Autoren / FAU-Herausgeber

Durst, Karsten PD Dr.
Lehrstuhl für Werkstoffwissenschaften (Allgemeine Werkstoffeigenschaften)
Hetzner, Harald
Lehrstuhl für Konstruktionstechnik
Schaufler, Jens
Lehrstuhl für Werkstoffwissenschaften (Allgemeine Werkstoffeigenschaften)
Tremmel, Stephan Dr.-Ing.
Lehrstuhl für Konstruktionstechnik
Wartzack, Sandro Prof. Dr.-Ing.
Lehrstuhl für Konstruktionstechnik


Zusätzliche Organisationseinheit(en)
Exzellenz-Cluster Engineering of Advanced Materials


Zitierweisen

APA:
Hetzner, H., Schaufler, J., Tremmel, S., Durst, K., & Wartzack, S. (2012). Failure mechanisms of a tungsten-modified hydrogenated amorphous carbon coating in load-scanning tests. Surface & Coatings Technology, 212(11), 46 - 54. https://dx.doi.org/10.1016/j.surfcoat.2012.09.012

MLA:
Hetzner, Harald, et al. "Failure mechanisms of a tungsten-modified hydrogenated amorphous carbon coating in load-scanning tests." Surface & Coatings Technology 212.11 (2012): 46 - 54.

BibTeX: 

Zuletzt aktualisiert 2018-07-07 um 14:23

Link teilen