The effect of liquid metal cooling on thermal gradients in directional solidification of superalloys: Thermal analysis

Beitrag in einer Fachzeitschrift
(Originalarbeit)


Details zur Publikation

Autor(en): Franke M, Hilbinger RM, Lohmüller A, Singer R
Zeitschrift: Journal of Materials Processing Technology
Jahr der Veröffentlichung: 2013
Band: 213
Heftnummer: 12
Seitenbereich: 2081-2088
ISSN: 0924-0136
Sprache: Englisch


Abstract


Numerical methods were used to examine the influence of casting and baffle geometry, mold thickness as well as withdrawal speed on solidification conditions and resulting microstructure. Achievable thermal gradients, stability limits and primary dendrite arm spacings for Liquid Metal Cooling (LMC) and High Rate Solidification (HRS) process are reported. Calculations were compared with experimental results from the literature and good agreement was found. A thermal gradient almost 1.8 times higher was observed for the use of LMC in the case of simple cylindrical castings. In contrast, a thermal gradient up to three times higher was calculated with LMC compared to HRS for large section size castings. The numerical investigations indicate that the nature of the baffle has a stronger effect than the different mechanism of heat dissipation when HRS and LMC are compared. © 2013 Elsevier B.V.



FAU-Autoren / FAU-Herausgeber

Franke, Martin
Lehrstuhl für Werkstoffwissenschaften (Werkstoffkunde und Technologie der Metalle)
Hilbinger, Rolf Michael
Lehrstuhl für Werkstoffwissenschaften (Werkstoffkunde und Technologie der Metalle)
Lohmüller, Andreas
Lehrstuhl für Werkstoffwissenschaften (Werkstoffkunde und Technologie der Metalle)
Singer, Robert Prof. Dr.-Ing.
Lehrstuhl für Werkstoffwissenschaften (Werkstoffkunde und Technologie der Metalle)


Zitierweisen

APA:
Franke, M., Hilbinger, R.M., Lohmüller, A., & Singer, R. (2013). The effect of liquid metal cooling on thermal gradients in directional solidification of superalloys: Thermal analysis. Journal of Materials Processing Technology, 213(12), 2081-2088. https://dx.doi.org/10.1016/j.jmatprotec.2013.06.001

MLA:
Franke, Martin, et al. "The effect of liquid metal cooling on thermal gradients in directional solidification of superalloys: Thermal analysis." Journal of Materials Processing Technology 213.12 (2013): 2081-2088.

BibTeX: 

Zuletzt aktualisiert 2018-06-12 um 20:50