Optimization of the Homogenization Heat Treatment of Nickel-Based Superalloys Based on Phase-Field Simulations: Numerical Methods and Experimental Validation

Beitrag in einer Fachzeitschrift
(Originalarbeit)


Details zur Publikation

Autor(en): Rettig R, Ritter N, Müller F, Franke M, Singer R
Zeitschrift: Metallurgical and Materials Transactions A-Physical Metallurgy and Materials Science
Verlag: Springer Boston
Jahr der Veröffentlichung: 2015
Band: 46
Heftnummer: 12
Seitenbereich: 5842-5855
ISSN: 1073-5623
Sprache: Englisch


Abstract


A method for predicting the fastest possible homogenization treatment of the as-cast microstructure of nickel-based superalloys is presented and compared with experimental results for the single-crystal superalloy ERBO/1. The computational prediction method is based on phase-field simulations. Experimentally determined compositional fields of the as-cast microstructure from microprobe measurements are being used as input data. The software program MICRESS is employed to account for multicomponent diffusion, dissolution of the eutectic phases, nucleation, and growth of liquid phase (incipient melting). The optimization itself is performed using an iterative algorithm that increases the temperature in such a way that the microstructural state is always very close to the incipient melting limit. Maps are derived allowing describing the dissolution of primary γ/γ′-islands and the elimination of residual segregation with respect to temperature and time.



FAU-Autoren / FAU-Herausgeber

Franke, Martin
Lehrstuhl für Werkstoffwissenschaften (Werkstoffkunde und Technologie der Metalle)
Lehrstuhl für Werkstoffwissenschaften (Werkstoffkunde und Technologie der Metalle)
Müller, Frank
Lehrstuhl für Werkstoffwissenschaften (Werkstoffkunde und Technologie der Metalle)
Rettig, Ralf Dr.-Ing.
Lehrstuhl für Werkstoffwissenschaften (Werkstoffkunde und Technologie der Metalle)
Ritter, Nils
Singer, Robert Prof. Dr.-Ing.
Lehrstuhl für Werkstoffwissenschaften (Werkstoffkunde und Technologie der Metalle)


Zitierweisen

APA:
Rettig, R., Ritter, N., Müller, F., Franke, M., & Singer, R. (2015). Optimization of the Homogenization Heat Treatment of Nickel-Based Superalloys Based on Phase-Field Simulations: Numerical Methods and Experimental Validation. Metallurgical and Materials Transactions A-Physical Metallurgy and Materials Science, 46(12), 5842-5855. https://dx.doi.org/10.1007/s11661-015-3130-y

MLA:
Rettig, Ralf, et al. "Optimization of the Homogenization Heat Treatment of Nickel-Based Superalloys Based on Phase-Field Simulations: Numerical Methods and Experimental Validation." Metallurgical and Materials Transactions A-Physical Metallurgy and Materials Science 46.12 (2015): 5842-5855.

BibTeX: 

Zuletzt aktualisiert 2018-25-11 um 20:50