Automated 3D assembly of periodic alumina‐epoxy composite structures

Beitrag in einer Fachzeitschrift
(Originalarbeit)


Details zur Publikation

Autor(en): Biggemann J, Diepold B, Pezoldt M, Stumpf M, Greil P, Fey T
Zeitschrift: Journal of the American Ceramic Society
Jahr der Veröffentlichung: 2018
Band: 101
Heftnummer: 9
Seitenbereich: 3864-3873
ISSN: 1551-2916


Abstract


Modular composites with a 3D periodic structure, consisting of a major brittle inorganic phase (building‐blocks) and a minor viscoelastic organic matrix, offer great potentials for improved fracture toughness and failure probability in polymer‐ceramic composites. Alumina building blocks with dimensions of 1500 μm were assembled by a novel placing system equipped with an automatic optical inspection (AOI) system.



The AOI system coupled with shape recognition enables simultaneous dimensional characterization, tolerance sorting and flexible placing of different shaped building blocks. 3D periodic structures with cubic, monoclinic and triclinic unit cells were fabricated by high accuracy placing of cubic building blocks enabling near‐net shape manufacturing. The placing precision of the assembled structures was determined by μCT to have a maximum deviation of ± 78 μm. The structures were afterwards infiltrated with a soft epoxy resin to fabricate epoxy‐alumina composites.



The brick‐and‐mortar like building block arrangements of the monoclinic and triclinic structures exhibited improved bending strength, fracture toughness and failure probability compared to monolithic epoxy, due to crack deflection and pull‐out toughening mechanisms. A maximum bending strength of 35.1 ± 7.5 MPa, a work‐of‐fracture of 814.7 ± 255.1 J/m² and a calculated fracture toughness of 4.8 ± 0.8 MPa√m for the triclinic structures was achieved.


FAU-Autoren / FAU-Herausgeber

Biggemann, Jonas
Lehrstuhl für Werkstoffwissenschaften (Glas und Keramik)
Diepold, Benedikt
Lehrstuhl für Werkstoffwissenschaften (Glas und Keramik)
Fey, Tobias Dr.
Lehrstuhl für Werkstoffwissenschaften (Glas und Keramik)
Greil, Peter Prof. Dr.
Lehrstuhl für Werkstoffwissenschaften (Glas und Keramik)
Pezoldt, Marc
Lehrstuhl für Werkstoffwissenschaften (Glas und Keramik)
Stumpf, Martin
Lehrstuhl für Werkstoffwissenschaften (Glas und Keramik)


Zitierweisen

APA:
Biggemann, J., Diepold, B., Pezoldt, M., Stumpf, M., Greil, P., & Fey, T. (2018). Automated 3D assembly of periodic alumina‐epoxy composite structures. Journal of the American Ceramic Society, 101(9), 3864-3873. https://dx.doi.org/10.1111/jace.15586

MLA:
Biggemann, Jonas, et al. "Automated 3D assembly of periodic alumina‐epoxy composite structures." Journal of the American Ceramic Society 101.9 (2018): 3864-3873.

BibTeX: 

Zuletzt aktualisiert 2019-02-01 um 05:10

Link teilen