Design of Planar Microstrip-to-Waveguide Transitions using Topology Optimization

Beitrag bei einer Tagung
(Konferenzbeitrag)


Details zur Publikation

Autor(en): Hassan E, Berggren M, Scheiner B, Michler F, Weigel R, Lurz F
Jahr der Veröffentlichung: 2019
Seitenbereich: 1-3


Abstract

This paper presents a topology optimization approach to design planar
transitions between a microstrip line (MSL) and a rectangular waveguide
(RWG) in the K-band. The transition comprises two sub-transitions: one
from the MSL to a substrate integrated waveguide (SIW) and the second
from the SIW to the RWG. Both are on the same substrate and can be
manufactured with a standard printed circuit board process. This leads
to a very cost-effective solution compared with other approaches. A
WR-42 waveguide can easily be surface mounted to the transitions using a
standard flange. The transitions have been fabricated, and their
measured performance shows good agreement with the simulations. The
MSL-SIW transition has a broadband behavior and the SIW-RWG transition
still reaches a relative bandwidth of 10%.


FAU-Autoren / FAU-Herausgeber

Lurz, Fabian
Lehrstuhl für Technische Elektronik
Michler, Fabian
Lehrstuhl für Technische Elektronik
Scheiner, Benedict
Lehrstuhl für Technische Elektronik
Weigel, Robert Prof. Dr.-Ing.
Lehrstuhl für Technische Elektronik


Autor(en) der externen Einrichtung(en)
Umeå University


Zitierweisen

APA:
Hassan, E., Berggren, M., Scheiner, B., Michler, F., Weigel, R., & Lurz, F. (2019). Design of Planar Microstrip-to-Waveguide Transitions using Topology Optimization. In Proceedings of the IEEE Radio and Wireless Symposium (RWS) (pp. 1-3). Orlando, FL, US.

MLA:
Hassan, Emadeldeen, et al. "Design of Planar Microstrip-to-Waveguide Transitions using Topology Optimization." Proceedings of the IEEE Radio and Wireless Symposium (RWS), Orlando, FL 2019. 1-3.

BibTeX: 

Zuletzt aktualisiert 2019-22-05 um 18:23