Additive Manufacturing of Ceramic-Based Materials

Journal article
(Review article)


Publication Details

Author(s): Travitzky N, Bonet A, Dermeik B, Fey T, Filbert-Demut I, Schlier L, Schlordt T, Greil P
Journal: Advanced Engineering Materials
Publisher: Wiley-VCH Verlag
Publication year: 2014
Volume: 16
Pages range: 729-754
ISSN: 1438-1656
Language: English


Abstract


This paper offers a review of present achievements in the field of processing of ceramic-based materials with complex geometry using the main additive manufacturing (AM) technologies. In AM, the geometrical design of a desired ceramic-based component is combined with the materials design. In this way, the fabrication times and the product costs of ceramic-based parts with required properties can be substantially reduced. However, dimensional accuracy and surface finish still remain crucial features in today's AM due to the layer-by-layer formation of the parts. In spite of the fact that significant progress has been made in the development of feedstock materials, the most difficult limitations for AM technologies are the restrictions set by material selection for each AM method and aspects considering the inner architectural design of the manufactured parts. Hence, any future progress in the field of AM should be based on the improvement of the existing technologies or, alternatively, the development of new approaches with an emphasis on parts allowing the near-net formation of ceramic structures, while optimizing the design of new materials and of the part architecture.



FAU Authors / FAU Editors

Bonet, Alexander
Lehrstuhl für Werkstoffwissenschaften (Glas und Keramik)
Dermeik, Benjamin
Lehrstuhl für Werkstoffwissenschaften (Glas und Keramik)
Fey, Tobias Dr.
Lehrstuhl für Werkstoffwissenschaften (Glas und Keramik)
Filbert-Demut, Ina
Lehrstuhl für Werkstoffwissenschaften (Glas und Keramik)
Greil, Peter Prof. Dr.
Lehrstuhl für Werkstoffwissenschaften (Glas und Keramik)
Schlier, Lorenz
Lehrstuhl für Werkstoffwissenschaften (Glas und Keramik)
Schlordt, Tobias
Lehrstuhl für Werkstoffwissenschaften (Glas und Keramik)
Travitzky, Nahum Prof. Dr.
Lehrstuhl für Werkstoffwissenschaften (Glas und Keramik)


How to cite

APA:
Travitzky, N., Bonet, A., Dermeik, B., Fey, T., Filbert-Demut, I., Schlier, L.,... Greil, P. (2014). Additive Manufacturing of Ceramic-Based Materials. Advanced Engineering Materials, 16, 729-754. https://dx.doi.org/10.1002/adem.201400097

MLA:
Travitzky, Nahum, et al. "Additive Manufacturing of Ceramic-Based Materials." Advanced Engineering Materials 16 (2014): 729-754.

BibTeX: 

Last updated on 2018-19-04 at 03:06