Experimental investigation of a process chain combining sheet metal bending and laser beam melting of Ti-6Al-4V

Conference contribution


Publication Details

Author(s): Butzhammer L, Dubjella P, Huber F, Schaub A, Aumüller M, Baum A, Petrunenko O, Merklein M, Schmidt M
Editor(s): Wissenschaftliche Gesellschaft Lasertechnik e.V.
Publication year: 2017
Language: English


Abstract


In spite of several advantages such as a great freedom of design, comparatively long process times are a major drawback in additive manufacturing technologies such as laser beam melting (LBM) of metal powder. A strategy to overcome this limitation is to combine additive manufacturing with other promising manufacturing concepts. In this paper, we characterize hybrid components manufactured using a consecutive process chain including warm bending of Ti-6Al-4V sheets and LBM. With the additive process a functional structure is built on top of the bending zone using powder from the same material. As a measure for the connection strength, shear tests were performed. The shear strength is analyzed for both possible process routes of forming and LBM. Therefore a modular clamping device for bent sheets was developed in order to enable simultaneous production of additive parts on several bent sheets with different thicknesses and radii. Results show that the formability of sheets is strongly influenced by the sequence of the process route, while no significant difference in shear strength of the connection was observed, even if the energy density in the LBM process is varied to a large extent. The post heat treatment is discussed as major cause, as homogenization of the microstructure takes place, although the applied temperature is beneath the beta transus temperature.



FAU Authors / FAU Editors

Aumüller, Markus
Lehrstuhl für Photonische Technologien
Butzhammer, Lorenz
Lehrstuhl für Photonische Technologien
Dubjella, Patrick
Sonderforschungsbereich 814 Additive Fertigung
Huber, Florian
Lehrstuhl für Photonische Technologien
Merklein, Marion Prof. Dr.-Ing.
Lehrstuhl für Fertigungstechnologie
Petrunenko, Oleksandra
Lehrstuhl für Fertigungstechnologie
Schaub, Adam
Lehrstuhl für Fertigungstechnologie
Schmidt, Michael Prof. Dr.-Ing.
Lehrstuhl für Photonische Technologien


Additional Organisation
Sonderforschungsbereich 814 Additive Fertigung


How to cite

APA:
Butzhammer, L., Dubjella, P., Huber, F., Schaub, A., Aumüller, M., Baum, A.,... Schmidt, M. (2017). Experimental investigation of a process chain combining sheet metal bending and laser beam melting of Ti-6Al-4V. In Wissenschaftliche Gesellschaft Lasertechnik e.V. (Eds.), . München, DE.

MLA:
Butzhammer, Lorenz, et al. "Experimental investigation of a process chain combining sheet metal bending and laser beam melting of Ti-6Al-4V." Proceedings of the Lasers in Manufacturing LIM 2017, München Ed. Wissenschaftliche Gesellschaft Lasertechnik e.V., 2017.

BibTeX: 

Last updated on 2018-19-04 at 04:15