Properties of powder injection molded graphite for tribological applications

Journal article
(Original article)


Publication Details

Author(s): Rottmair CA, Gruhl M, Winter R, Singer R
Journal: Advanced Engineering Materials
Publication year: 2009
Volume: 11
Journal issue: 5
Pages range: 346-349
ISSN: 1438-1656
Language: English


Abstract


The properties of powder injection molded graphite for tribiology applications, where the mechanical properties of the injection molded graphite can already compete with conventional pressed qualities in the early stage of development. Mesocarbon microbead powder with an average grain size of 6μm was compounded with approximately 30wt% water and 6 wt% agar and some additives to tailor gel strength and viscosity. The drying process was carried out in a climatic chamber, in order to ensure reproducibility, where the dried green bodies were subsequently sintered in a tube furnace under argon flow up to a temperature of 1000° C. The influence of the heat treatment temperature is clearly visible: with increasing heat treatment temperature the coefficient of friction decreases, and further observations were made while examining the surface of the graphite samples. The production capabilities of the injection molding process, was found to be cost saving due to the net shape compared to standard coke.



FAU Authors / FAU Editors

Singer, Robert Prof. Dr.-Ing.
Lehrstuhl für Werkstoffwissenschaften (Werkstoffkunde und Technologie der Metalle)


How to cite

APA:
Rottmair, C.A., Gruhl, M., Winter, R., & Singer, R. (2009). Properties of powder injection molded graphite for tribological applications. Advanced Engineering Materials, 11(5), 346-349. https://dx.doi.org/10.1002/adem.200800320

MLA:
Rottmair, Christian A., et al. "Properties of powder injection molded graphite for tribological applications." Advanced Engineering Materials 11.5 (2009): 346-349.

BibTeX: 

Last updated on 2018-18-12 at 13:50

Share link