Simple and efficient method to fabricate nano cone arrays by FIB milling demonstrated on planar substrates and on protruded structures
Rommel M, Bauer AJ, Frey L (2012)
Publication Status: Published
Publication Type: Journal article, Original article
Publication year: 2012
Journal
Book Volume: 98
Pages Range: 242-245
DOI: 10.1016/j.mee.2012.07.009
Abstract
A simple, fast and efficient method is demonstrated for the fabrication of very homogeneous periodic nano-cone arrays on planar Si substrates by focused ion beam milling. The approach makes use of the actual shape of the ion beam by simply milling lines in vertical and horizontal direction with the lines separated by the targeted periodicity. If beam currents and, thus, beam diameters are chosen appropriately, this patterning approach results in nano-cone arrays with apex radii of 25~nm and below. Arrays with periodicities of 600, 300, and 150~nm are realized with minimum processing times of the order of 30~s for an area of 30~\textgreekmm2 without a change in the quality of the cones by area scaling. To a certain extent, height, aspect ratio, apex radius and shape of the individual cones can be varied using different beam diameters. While constant dwell times are used for planar samples, it is shown that homogeneous nano-cone arrays can only be realized on the whole surface of protruded rectangular mesa structures if the patterning strategy is adapted appropriately. In the successfully modified approach the dwell time is gradually decreased along the milled lines from the center of the array towards the edges and a frame like pattern is added at the edges of the protruded structures.
Authors with CRIS profile
Additional Organisation(s)
Involved external institutions
Germany (DE)How to cite
APA:
Rommel, M., Bauer, A.J., & Frey, L. (2012). Simple and efficient method to fabricate nano cone arrays by FIB milling demonstrated on planar substrates and on protruded structures. Microelectronic Engineering, 98, 242-245. https://dx.doi.org/10.1016/j.mee.2012.07.009
MLA:
Rommel, Mathias, A. J. Bauer, and Lothar Frey. "Simple and efficient method to fabricate nano cone arrays by FIB milling demonstrated on planar substrates and on protruded structures." Microelectronic Engineering 98 (2012): 242-245.
BibTeX: Download