Prof. Dr. Mathias Göken



Organisation


Lehrstuhl für Werkstoffwissenschaften (Allgemeine Werkstoffeigenschaften)



Project lead

Go to first page Go to previous page 1 of 2 Go to next page Go to last page

(In-situ Characterization of Nanomaterials with Electrons, X-rays/Neutrons and Scanning Probes):
B2: Adhesion and friction of particles on model surfaces
Prof. Dr. Mathias Göken; Prof. Dr.-Ing. Wolfgang Peukert
(01/10/2013 - 30/09/2017)

(In-situ Characterization of Nanomaterials with Electrons, X-rays/Neutrons and Scanning Probes):
B5: Plasticity at interfaces in complex compounds
Prof. Dr. Mathias Göken; Prof. Dr. Erdmann Spiecker
(01/10/2013 - 30/09/2017)

(In-situ Characterization of Nanomaterials with Electrons, X-rays/Neutrons and Scanning Probes):
B3: Strength and toughness of interfaces at small scales
Prof. Dr. Mathias Göken
(01/10/2013 - 30/09/2017)

Relationship between microstructure and mechanical properties of the nickel base superalloy Allvac®718Plus®, especially the creep behavior, taking into account long-term stability and location-dependent properties
Prof. Dr. Mathias Göken; Prof. Dr.-Ing. Robert Singer
(01/01/2012 - 30/12/2014)

Determination of ambient conditions during coseismic formation of pseudotachylyte by means of Ti-in-quartz geothermometry and Ar-Ar dating
Dr. Michel Bestmann; Prof. Dr. Helga de Wall; Prof. Dr. Mathias Göken
(01/02/2011 - 31/01/2012)


Project member


(Pre-standardisation of incremental FIB micro-milling for intrinsic stress evaluation at the sub-micron scale):
ISTRESS: Pre-standardisation of incremental FIB micro-milling for intrinsic stress evaluation at the sub-micron scale
Prof. Dr.-Ing. Erik Bitzek
(01/01/2014 - 31/12/2016)

CENEM: CENEM Core Facility
Prof. Dr. Erdmann Spiecker
(01/03/2012)

CENEM: CENEM Core Facility
Prof. Dr. Tobias Unruh
(01/03/2012 - 31/03/2019)


Publications (Download BibTeX)

Go to first page Go to previous page 1 of 15 Go to next page Go to last page

Kolb, M., Freund, L., Fischer, F., Povstugar, I., Makineni, S.K., Gault, B.,... Göken, M. (2018). On the grain boundary strengthening effect of boron in γ/γ′ Cobalt-base superalloys. Acta Materialia, 247-254. https://dx.doi.org/10.1016/j.actamat.2017.12.020
Volz, N., Zenk, C., Cherukuri, R., Kalfhaus, T., Weiser, M., Makineni, S.K.,... Göken, M. (2018). Thermophysical and Mechanical Properties of Advanced Single Crystalline Co-base Superalloys. Metallurgical and Materials Transactions A-Physical Metallurgy and Materials Science, 1-11. https://dx.doi.org/10.1007/s11661-018-4705-1
Feldner, P., Merle, B., & Göken, M. (2017). Determination of the strain-rate sensitivity of ultrafine-grained materials by spherical nanoindentation. Journal of Materials Research, 32, 1466-1473. https://dx.doi.org/10.1557/jmr.2017.69
Feldner, P., Merle, B., & Göken, M. (2017). Determination of the strain-rate sensitivity of ultrafine-grained materials by spherical nanoindentation. Journal of Materials Research, 32(8), 1466-1473. https://dx.doi.org/10.1557/jmr.2017.69
Fischer, C., Seefried, A., Merle, B., Göken, M., & Drummer, D. (2017). Influencing Hardness and Wear During the Dynamic Tempered Microinjection Molding Process by Considering Isothermal Holding Time. Polymer Engineering and Science, 57(2), 121-128. https://dx.doi.org/10.1002/pen.24394
Freund, L., Messe, O.M.D.M., Barnard, J.S., Göken, M., Neumeier, S., & Rae, C.M.F. (2017). Segregation assisted microtwinning during creep of a polycrystalline L12-hardened Co-base superalloy. Acta Materialia, 123, 295-304. https://dx.doi.org/10.1016/j.actamat.2016.10.048
Shrestha, S., Fischer, R., Matt, G., Feldner, P., Michel, T., Osvet, A.,... Brabec, C. (2017). High-performance direct conversion X-ray detectors based on sintered hybrid lead triiodide perovskite wafers. Nature Photonics, 11(7), 436-+. https://dx.doi.org/10.1038/NPHOTON.2017.94
Iqbal, F., Pyczak, F., Neumeier, S., & Göken, M. (2017). Crack nucleation and elastic / plastic deformation of TiAl alloys investigated by in-situ loaded atomic force microscopy. Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing, 689, 11-16. https://dx.doi.org/10.1016/j.msea.2017.02.017
Mikschl, F., Merle, B., Baum, M., Heberle, J., Göken, M., & Schmidt, M. (2017). Micromechanical characterization of laser consolidated nanoparticle ITO layers. Thin Solid Films, 642, 214-218. https://dx.doi.org/10.1016/j.tsf.2017.09.046
Preiß, E., Merle, B., & Göken, M. (2017). Understanding the Extremely Low Fracture Toughness of Freestanding Gold Thin Films by In-situ Bulge Testing in an AFM. Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing, 691, 218-225. https://dx.doi.org/10.1016/j.msea.2017.03.037

Last updated on 2016-05-05 at 05:03