Lehrstuhl für Werkstoffwissenschaften (Werkstoffkunde und Technologie der Metalle)

Address:
Martensstraße 5
91058 Erlangen


Research Fields

Additive Manufacturing
High Temperature Materials
Lightweight Materials
Modelling and Simulation
Ultra Hard Coatings


Related Project(s)

Go to first page Go to previous page 1 of 21 Go to next page Go to last page

Modeling and simulation of multi-material processing of metallic materials in beam-based additive manufacturing in the powder bed
Prof. Dr.-Ing. Carolin Körner
(01/04/2019 - 30/09/2021)


(Auslegungsgrundlagen einer tubulären, mittels additiver Methoden und Extrusion gefertigten Elektrolysezelle):
Tubulyze: Additive Fertigung positiver Elektrodengerüste, Oberflächenpräparation und Katalysatorbeschichtung
Prof. Julien Bachmann; Prof. Dr.-Ing. Carolin Körner
(01/01/2019 - 31/12/2022)


Basic research on the fabrication and properties of in situ AI3Ti-reinforced aluminum casting alloys
Prof. Dr.-Ing. Carolin Körner
(01/01/2019 - 31/12/2020)


(Additive Manufacturing using Metal Pilot Line):
MANUELA: Additive Manufacturing using Metal Pilot Line
Prof. Dr.-Ing. Carolin Körner
(01/10/2018 - 30/09/2022)


Generation of hierarchically structured fine surface formations by machining processes for reducing residual stresses in CVD diamond layers on steel
PD Dr.-Ing. Stefan Rosiwal
(01/09/2018 - 31/08/2020)



Publications (Download BibTeX)

Go to first page Go to previous page 1 of 26 Go to next page Go to last page

Fiegl, T., Franke, M., & Körner, C. (2019). Impact of build envelope on the properties of additive manufactured parts from AlSi10Mg. Optics and Laser Technology, 111, 51-57. https://dx.doi.org/10.1016/j.optlastec.2018.08.050
Wolf, T., Fu, Z., & Körner, C. (2019). Selective electron beam melting of an aluminum bronze: Microstructure and mechanical properties. Materials Letters, 238, 241-244. https://dx.doi.org/10.1016/j.matlet.2018.12.015
Novak, N., Borovinsek, M., Vesenjak, M., Wormser, M., Körner, C., Tanaka, S.,... Ren, Z. (2018). Crushing Behavior of Graded Auxetic Structures Built from Inverted Tetrapods under Impact. Physica Status Solidi (B) Basic Research. https://dx.doi.org/10.1002/pssb.201800040
Köpf, J., Rasch, M., Meyer, A., Markl, M., Schmidt, M., & Körner, C. (2018). 3D grain growth simulation and experimental verification in laser beam melting of IN718. In Procedia CIRP 74 (2018) (pp. 82–86). Fürth, DE.
Markl, M., Müller, A., Ritter, N., Hofmeister, M., Naujoks, D., Schaar, H.,... Körner, C. (2018). Development of Single-Crystal Ni-Base Superalloys Based on Multi-criteria Numerical Optimization and Efficient Use of Refractory Elements. Metallurgical and Materials Transactions A-Physical Metallurgy and Materials Science, 49A(9), 4134-4145. https://dx.doi.org/10.1007/s11661-018-4759-0
Osmanlic, F., Wudy, K., Laumer, T., Schmidt, M., Drummer, D., & Körner, C. (2018). Modeling of Laser Beam Absorption in a Polymer Powder Bed. Polymers, 10(7). https://dx.doi.org/10.3390/polym10070784
Ritter, N., Sowa, R., Schauer, J.C., Gruber, D., Göhler, T., Rettig, R.,... Singer, R. (2018). Effects of Solid Solution Strengthening Elements Mo, Re, Ru, and W on Transition Temperatures in Nickel-Based Superalloys with High γ′-Volume Fraction: Comparison of Experiment and CALPHAD Calculations. Metallurgical and Materials Transactions A-Physical Metallurgy and Materials Science. https://dx.doi.org/10.1007/s11661-018-4730-0
Pobel, C., Lodes, M., & Körner, C. (2018). Selective Electron Beam Melting of Oxide Dispersion Strengthened Copper. Advanced Engineering Materials, 20(8). https://dx.doi.org/10.1002/adem.201800068
Köpf, J., Gotterbarm, M., Markl, M., & Körner, C. (2018). 3D multi-layer grain structure simulation of powder bed fusion additive manufacturing. Acta Materialia, 152, 119-126. https://dx.doi.org/10.1016/j.actamat.2018.04.030
Winkler, A., Modler, N., Drossel, W.-G., Mäder, T., & Körner, C. (2018). High-Volume Production-Compatible Technologies for Light Metal and Fiber Composite-Based Components with Integrated Piezoceramic Sensors and Actuators. Advanced Engineering Materials, 20(12). https://dx.doi.org/10.1002/adem.201801001
Jüchter, V. (2018). Grundlagen des Selektiven Elektronenstrahlschmelzens von Titanaluminiden (Dissertation).
Hübner, D., Gotterbarm, M., Kergaßner, A., Köpf, J., Pobel, C., Markl, M.,... Stingl, M. (2018). Topology Optimization in Additive Manufacturing Considering the Grain Structure of Inconel 718 using Numerical Homogenization. In Proceedings of 7th International Conference on Additive Technologies (pp. 102-111). Maribor, SI.
Ramsperger, M. (2018). Selektives Elektronenstrahlschmelzen der einkristallinen Ni-Basis Superlegierung CMSX-4 (Dissertation).
Zeng, Y., Himmler, D., Randelzhofer, P., & Körner, C. (2018). Microstructures and Mechanical Properties of Al3Ti/Al Composites Produced In Situ by High Shearing Technology. Advanced Engineering Materials. https://dx.doi.org/10.1002/adem.201800259
Arnold, C., Pobel, C., Osmanlic, F., & Körner, C. (2018). Layerwise monitoring of electron beam melting via backscatter electron detection. Rapid Prototyping Journal. https://dx.doi.org/10.1108/RPJ-02-2018-0034
Sheng, N., Horke, K., Meyer, A., Rettig, R., & Singer, R. (2018). Oxidation Behavior of Superalloy IN 713 Fabricated by Metal Injection Molding. Oxidation of Metals. https://dx.doi.org/10.1007/s11085-018-9869-y
Bauereiß, A. (2018). Mesoskopische Simulation des selektiven Strahlschmelzens mittels einer Lattice Boltzmann Methode mit dynamischer Gitteranpassung (Dissertation).
Jüchter, V., Franke, M., Merenda, T., Stich, A., Körner, C., & Singer, R. (2018). Additive manufacturing of Ti-45Al-4Nb-C by selective electron beam melting for automotive applications. Additive Manufacturing, 22, 118-126. https://dx.doi.org/10.1016/j.addma.2018.05.008
Rausch, A., Markl, M., & Körner, C. (2018). Predictive simulation of process windows for powder bed fusion additive manufacturing: Influence of the powder size distribution. Computers & Mathematics With Applications. https://dx.doi.org/10.1016/j.camwa.2018.06.029
Körner, C., Ramsperger, M., Meid, C., Bürger, D., Wollgramm, P., Bartsch, M., & Eggeler, G. (2018). Microstructure and Mechanical Properties of CMSX-4 Single Crystals Prepared by Additive Manufacturing. Metallurgical and Materials Transactions A-Physical Metallurgy and Materials Science, 49(9), 3781-3792. https://dx.doi.org/10.1007/s11661-018-4762-5

Last updated on 2017-15-03 at 01:00