Professur für Rechnergestützten Schaltungsentwurf

Adresse:
Cauerstraße 7/9
91058 Erlangen


Publikationen (Download BibTeX)

Go to first page Go to previous page 1 von 3 Go to next page Go to last page

Lomakin, K., Guschlbauer, R., Osmanlic, F., Fu, Z., Sippel, M., Helmreich, K.,... Gold, G. (2019). 3D Printed Copper Waveguides by Selective Electron Beam Melting Process for E-Band. In Proceedings of the EuMW 2019. Paris.
Lomakin, K., Herold, S., Simon, D., Sippel, M., Sion, A., Vossiek, M.,... Gold, G. (2019). 3D Printed Slotted Rectangular Hollow Waveguides. In Proceedings of the 2019 IEEE MTT-S International Microwave Symposium. Boston, USA, US.
Lau, I., Hajian, A., Michler, F., Gold, G., Lurz, F., Schmid, U.,... Kölpin, A. (2019). Influence of the PCB Manufacturing Process on the Measurement Error of Planar Relative Permittivity Sensors Up To 100 GHz. IEEE Transactions on Microwave Theory and Techniques, 1-12. https://dx.doi.org/10.1109/TMTT.2019.2910114
Gold, G., Lomakin, K., Helmreich, K., & Arz, U. (2019). High-Frequency Modeling of Coplanar Waveguides Including Surface Roughness. Advances in Radio Science, 17.
Lomakin, K., Ankenbrand, M., Sippel, M., Franke, J., Helmreich, K., & Gold, G. (2019). Nanjoet 3D Printed Coplanar Waveguides on Flexible Polyimide Substrate up to 24 GHz. (Unpublished, Accepted).
Köppel, M., Deckelmann, M., Sippel, M., Lomakin, K., Werzinger, S., Gold, G.,... Schmauß, B. (2018). Using coherent optical frequency domain reflectometry to assist the additive manufacturing process of structures for radio frequency applications. In SPIE Optics + Photonics: Optical Engineering + Applications. San Diego, US.
Lomakin, K., Gold, G., & Helmreich, K. (2018). Analytical Waveguide Model Precisely Predicting Loss and Delay Including Surface Roughness. IEEE Transactions on Microwave Theory and Techniques. https://dx.doi.org/10.1109/tmtt.2018.2827383
Lomakin, K., Simon, D., Sippel, M., Gold, G., Helmreich, K., Seler, E.,... Reuter, R. (2018). 3D Printed Slotted Waveguide Array Antenna for Automotive Radar Applications in W-Band. In 48th European Microwave Conference (EuMW 2018).
Lomakin, K., Sippel, M., Gold, G., Ringel, J., Weiß, D., Helmreich, K.,... Franke, J. (2018). Substituting bond wires by additively manufactured interconnections. In German Microwave Conference.
Lomakin, K., Pavlenko, T., Sippel, M., Gold, G., Helmreich, K., Ankenbrand, M.,... Franke, A. (2018). Impact of Surface Roughness on 3D printed SLS Horn Antennas. In European Conference on Antennas and Propagation (EUCAP).
Lomakin, K., Sippel, M., Gold, G., Fröhlich, J., Helmreich, K., Ankenbrand, M., & Franke, J. (2018). Low reflective aerosol Jet printed broadband matched load up to 67 GHz. In German Microwave Conference.
Lomakin, K., Pavlenko, T., Sippel, M., Gold, G., Weidner, T., Helmreich, K.,... Franke, J. (2018). 3D Printed Helix Antenna. In European Conference on Antennas and Propagation (EUCAP). London, GB.
Ankenbrand, M., Franke, J., Lomakin, K., Pavlenko, T., Sippel, M., Gold, G.,... Helmreich, K. (2018). Erzeugung von 3D-Funktionsstrukturen fuer Hochfrequenzanwendungen durch Druckverfahren. PLUS - Produktion von Leiterplatten und Systemen.
Ankenbrand, M., Scheetz, M., Franke, J., Lomakin, K., Sippel, M., Gold, G., & Helmreich, K. (2018). Generation of 3D Functional Structures for High- Frequency Applications by Printing Technologies. In Proceedings of the 2018 13th International Congress Molded Interconnect Devices (MID).
Lomakin, K., Pavlenko, T., Ankenbrand, M., Sippel, M., Ringel, J., Scheetz, M.,... Gold, G. (2018). Evaluation and Characterization of 3D Printed Pyramid Horn Antennas utilizing different Deposition Techniques for Conductive Material. IEEE Transactions on Components, Packaging and Manufacturing Technology, 1-1. https://dx.doi.org/10.1109/tcpmt.2018.2871931
Gold, G., & Helmreich, K. (2017). Modeling Conductor Surface Roughness. In IMS 2017 Workshop on New Developments in Microwave Measurements for Planar Circuits and Components. Honolulu, US.
Gold, G., & Helmreich, K. (2017). A Physical Surface Roughness Model and Its Applications. IEEE Transactions on Microwave Theory and Techniques. https://dx.doi.org/10.1109/TMTT.2017.2695192
Talai, A., Gold, G., Frank, M., Mann, S., Weigel, R., & Kölpin, A. (2017). A Coplanar Waveguide Resonator Based In-Line Material Characterization Sensor for Bulk and Metallized Dielectrics. Frequenz, 71(3-4). https://dx.doi.org/10.1515/freq-2016-0201
Sippel, M., Lomakin, K., Gold, G., & Helmreich, K. (2017). Characteristics of Anisotropic Conducting Polymers Suggest Feasibility of Test Fixtures up to 110 GHz. Electronics. https://dx.doi.org/10.3390/electronics6040109
Sippel, M., Lomakin, K., Gold, G., Reitberger, T., Neermann, S., & Helmreich, K. (2017). Simple Approach for brief RF Characterization of thin 3D printable Dielectrics. In 21st IEEE Workshop on Signal and Power Integrity (SPI 2017). Baveno, IT.

Zuletzt aktualisiert 2019-24-04 um 10:28