Professur für Rechnergestützten Schaltungsentwurf

Adresse:
Cauerstraße 7/9
91058 Erlangen


Publikationen (Download BibTeX)

Go to first page Go to previous page 1 von 3 Go to next page Go to last page

Köppel, M., Deckelmann, M., Sippel, M., Lomakin, K., Werzinger, S., Gold, G.,... Schmauß, B. (2018). Using coherent optical frequency domain reflectometry to assist the additive manufacturing process of structures for radio frequency applications. In SPIE Optics + Photonics: Optical Engineering + Applications. San Diego, US.
Lomakin, K., Gold, G., & Helmreich, K. (2018). Analytical Waveguide Model Precisely Predicting Loss and Delay Including Surface Roughness. IEEE Transactions on Microwave Theory and Techniques. https://dx.doi.org/10.1109/tmtt.2018.2827383
Lomakin, K., Simon, D., Sippel, M., Gold, G., Helmreich, K., Seler, E.,... Reuter, R. (2018). 3D Printed Slotted Waveguide Array Antenna for Automotive Radar Applications in W-Band. In 48th European Microwave Conference (EuMW 2018).
Lomakin, K., Sippel, M., Gold, G., Ringel, J., Weiß, D., Helmreich, K.,... Franke, J. (2018). Substituting bond wires by additively manufactured interconnections. In German Microwave Conference.
Lomakin, K., Pavlenko, T., Sippel, M., Gold, G., Weidner, T., Helmreich, K.,... Franke, J. (2018). 3D Printed Helix Antenna. In European Conference on Antennas and Propagation (EUCAP). London, GB.
Lomakin, K., Pavlenko, T., Sippel, M., Gold, G., Helmreich, K., Ankenbrand, M.,... Franke, A. (2018). Impact of Surface Roughness on 3D printed SLS Horn Antennas. In European Conference on Antennas and Propagation (EUCAP).
Ankenbrand, M., Scheetz, M., Franke, J., Lomakin, K., Sippel, M., Gold, G., & Helmreich, K. (2018). Generation of 3D Functional Structures for High- Frequency Applications by Printing Technologies.
Lomakin, K., Pavlenko, T., Ankenbrand, M., Sippel, M., Ringel, J., Scheetz, M.,... Gold, G. (2018). Evaluation and Characterization of 3D Printed Pyramid Horn Antennas utilizing different Deposition Techniques for Conductive Material. IEEE Transactions on Components, Packaging and Manufacturing Technology, 1-1. https://dx.doi.org/10.1109/tcpmt.2018.2871931
Lomakin, K., Sippel, M., Gold, G., Fröhlich, J., Helmreich, K., Ankenbrand, M., & Franke, J. (2018). Low reflective aerosol Jet printed broadband matched load up to 67 GHz. In German Microwave Conference.
Ankenbrand, M., Franke, J., Lomakin, K., Pavlenko, T., Sippel, M., Gold, G.,... Helmreich, K. (2018). Erzeugung von 3D-Funktionsstrukturen fuer Hochfrequenzanwendungen durch Druckverfahren. PLUS - Produktion von Leiterplatten und Systemen.
Lomakin, K., Gold, G., & Helmreich, K. (2017). Transmission Line Model for Rectangular Waveguides accurately incorporating Loss Effects. In 21st IEEE Workshop on Signal and Power Integrity (SPI 2017). Baveno, IT.
Lomakin, K., Sippel, M., Gold, G., Rochholz, P., Helmreich, K., Ankenbrand, M.,... Franke, J. (2017). Additive Fertigung in der Hochfrequenztechnik – Potenziale und Herausforderungen. PLUS - Produktion von Leiterplatten und Systemen.
Gold, G., & Helmreich, K. (2017). A Physical Surface Roughness Model and Its Applications. IEEE Transactions on Microwave Theory and Techniques. https://dx.doi.org/10.1109/TMTT.2017.2695192
Talai, A., Gold, G., Frank, M., Mann, S., Weigel, R., & Kölpin, A. (2017). A Coplanar Waveguide Resonator Based In-Line Material Characterization Sensor for Bulk and Metallized Dielectrics. Frequenz, 71(3-4). https://dx.doi.org/10.1515/freq-2016-0201
Sippel, M., Lomakin, K., Gold, G., & Helmreich, K. (2017). Characteristics of Anisotropic Conducting Polymers Suggest Feasibility of Test Fixtures up to 110 GHz. Electronics. https://dx.doi.org/10.3390/electronics6040109
Sippel, M., Lomakin, K., Gold, G., Reitberger, T., Neermann, S., & Helmreich, K. (2017). Simple Approach for brief RF Characterization of thin 3D printable Dielectrics. In 21st IEEE Workshop on Signal and Power Integrity (SPI 2017). Baveno, IT.
Gold, G., & Helmreich, K. (2017). Modeling Conductor Surface Roughness. In IMS 2017 Workshop on New Developments in Microwave Measurements for Planar Circuits and Components. Honolulu, US.
Distler, F., Gold, G., Thurn, K., Schür, J.S., & Vossiek, M. (2017). Crosstalk Simulation of Multiple Insulated Twisted Pairs based on Transmission Line Theory. In 21st IEEE Workshop on Signal and Power Integrity (SPI 2017).
Gold, G., & Helmreich, K. (2016). Modeling of Transmission Lines with Multiple Coated Conductors. London, GB.
Gold, G. (2016). Modeling Surface Roughness in CST Microwave Studio. Strasbourg.

Zuletzt aktualisiert 2016-05-05 um 04:58